HP LaseJet 4350dtn Laser Printer "reset fuser kit error" Questions

...reset the fuser page count so the warning message will not appear prematurely. To reset the fuser count : 1. Press MENU to enter the MENUS. 2. Press Down arrow to highlight Configure Device. 3. Press ...

...reset the fuser maintenance count: HP Color LaserJet 5500/5550 Maintenance Code Reset Instructions Press the ∇ button until the display reads "CONFIGURE DEVICE" and press √. Press ...

...reset fuser life error c810 the best soloution is to replace the unit with a brand new one as reset fuses are difficult to work with on fuser units but if you search the internet you might be able to ...

Fuser installation. 3. Transfer roller installation. 4. Cassette feed/pickup rollers. 5. Tray 1 (manual feed) pickup rollers/feed rollers. 6. Reset the maintenance count. Please rate this solution and

...Fuser." What does code 008 mean? The printer will print great for a time, but then will start to print very light on sections of the page. 008 is the printers code to tell you to replace the ...

...fuser. How do I reset the paper count? Go to Config by turning off the printer. Then press and hold Select and Return buttons while turning on the printer. Once in Config Menu, choose Reset ...

...and RETURN buttons while powering on the printer until the display reads PERFORMING SELF TEST. After the self test, the display will read CONFIG MENU 2. Select individual reset for fuser or ITU ...

fuser. 6. Perform a cold reset on the printer. a. Turn on the printer. b. Watch the control panel. c. When the memory starts counting, press and hold the green (Select) button. d. Continue holding the

...reset fuser status, on the printer: 1. Press the "Menu" button 2. Navigate to "Configure Device" 3. Select "Reset Supplies" 3. Select "New Fuser Kit" After doing so, the printer will reset the count ...

...fuser error. U4-1. Once replaced the error remained. Any ideas? Try to hard reset your printer. To do this, unplug the cord at the rear of the printer while still powered on. Then remove it the plug ...