Lowrance Iway 500c GPS Receiver "screen not" Questions

...screen will not operate. Can this problem be repaired? I HAD THE SAME PROBLEM AFTER I DOWNLOADED THE LATEST UPDATE. I RELOADED IT AND NOW IT SEEMS TO WORK OK. GO TO THE LOWRANCE WEB SITE AND THEN TO ...

...screen was really loose. I tightened it and now its working again for now. I am not happy with Lowrance support. Clane I'm having the same problem. Every time I get the box out and get ready to send ...

...not no reason.now it does turn on and at the rite angle i can read the screen but it seems that screen light is out is there something that can c,lear unit or check screen light> Have you tried ...

Powers on but will not change from thw Iway main screen. Unknown device when usb connection is made. Have you tried resetting the unit? If not, I believe there is another FYI answer that describes how

...screen is frozen and soft and hard reset not possible; I have the same problem essentially. The only thing I can do is pan left and right in map mode. I can't access any of the buttons that appear ...

...screen may go blank for a split second before the next view appears. the unit does not lose location/tracking when this happens. I have been unable to duplicate this using a power converter in the ...

...screen locks up and freezes but when i take it out it unlocks or unfreezes. I have the updated software (1.3.0) but that didn't make any difference. What should i do Gurus? make sure your card is not ...

screen failure My 250c got misted with water, not soaked but enough to evidently cause damage. I opened it and found no evidence of moisture, but left it open over a light bulb to thoroughly drive out

not work iway 500 when unit is on no light at all on screen Unfortunately, the 500c is obsolete now and Lorance cannot repair the LCD screens anymore. Your only option may be to call Lowrance at (800)

which buttons you press in this mode - select only the on-screen buttons, not the hard-buttons as they adjust brightness and contrast. Select the correct operating mode and power the unit off, then on