Kenwood KAC-7202 Car Audio Amplifier "pops high volume" Questions

...volume up. ok what is the amp out put of your altanator and were did you hook the romte turn on wire two. It is usally blue. Sounds like the gain is to high up on amp start at 1/4 gain and if amp is ...

...the way down all 3 p-3 will pop at high volume why? the 2 gave a evenly divided power 3 gives it a uneven power sorce you want to give them all about the same power or you will destroy your voice ...

...high volume the amp does not have great ventilation but all the sudden the subs just stopped working i tried switching wires and everything but i cant figure out what is wrong now one of my subs is ...

...pops fuses at medium to high volume. worked fine in my car, and when i put it in my friends somehow it stopped working. coincidence or my fault idn but i need to figure out whats wrong. any help? i ...

...high and crank the volume up my subs pop they stop working so i have to turn off my stero and turn the volume down. then turn my base down to be able to turn up the volume up. the amp is supose to be ...

...pops back on. I have two separate amps for bass and Mid/High range. They are both cutting off.... You need to check the B+ and remote voltage on the amp when it cuts off (assuming that you can ...

What do you do when your amp keeps blowing fuses First off which fuse is it? The inline fuse from the battery or the amplifiers power supply fuse? Blowing the main fuse from the battery is caused by ...

...high volume. found out the built in cross over has issues unfortuatly the parts on this doughter board have the part numbers removed and cant get a manual so i wait till i come across another one to ...

...popping number 40 fuses and i cant figure out why. Its wired up with an 8 guage wiring kit. Does it blow them immediately when inserted, only after the headf unit is turned on or only at high

...high. Check speaker polarity with a AA battery(Speaker pops out when polarity is correct) Make sure the speaker crossovers are working properly. Check your ohm load when you connect the speakers ...