Sony STR-DA30ES Receiver "protector error" Questions

...protector' error. Any help? Try disconnecting all the speakers from the back and turn the unit back on. If the "protector" display goes away, turn the unit back off and reconnect one speaker. Turn it ...

error code 11 (protector) - According to the manual, 11/PROTECTOR means, "Irregular current is output from the speakers. Turn of the receiver, check the speaker connection and turn on the power again.

...error and turn off? SONY ' eSupport - PROTECT or PROTECTOR is flashing in ... https://us.en.kb.sony.com/.../protect-or-protector-is-flashing-in-the-displa... Aug 15, 2015 - Turn off the home audio ...

...can i there's an error pow5v on the display what can i do?? chek it on service manual, I remplazed Icn 601 TA7317P speaker protector ...and it works succesfully tecso.com.mx Marantz servicing ...

Receiving PROTECTOR error message on power-up on Accurian 6.1 ch Sirius Ready surround receiver model 31-5048 ;machine then powers off. power output short need replaced....

error message tha says protector Please see the following for an explanation: http://www.fixya.com/support/r5390728-protector_means Dan

...Protector Fan problem. I disconnected everything, check the fuses (none blown) and powered down the unit for 2 hours without resolution of this problem. Any suggestions? Help! What part of FAN ERROR ...

...error message" 'PROTECTOR' on Accurian 6.1 Sirius-ready surround receiver model 31-5048? Probably need to replace output transistors and a resistor or two. Could also be one of the 12v regulators. A ...

error code 11 protector unit has no speakers My only suggestion on the above information would be to reset the receiver. You can do this by first turning off the receiver. Once the receiver is off, ...

protector error on my Sony STR-DA90ESG The receiver has detected a problem in the final output stage and has shutdown to prevent further damage to either the amp or the speakers. The most common cause