Westinghouse W32001 20 in. HD-Ready LCD Television "ir remote manual" Questions

...that the IR board is bad then replacing the IR board will fix the remote issue. IR board is an easy fix. Just open the back cover out and it's located right in the middle toward the bottom of the

IR signals. Testing remote control: The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at

...IR remote input jack in the back (the size of small headphone jack), when the external remote receiver is used, it will shutoff the remote receiver in the front of the TV, this jack has a switch ...

...or manual. Sometimes the IR receiver on televisions refuse to read IR codes from the remote. Resetting the television by turning it off and unplugging it for a few minutes usually solves this

...IR board fails, then the TV will not respond to the remote. The TV will work fine with the manual controls, but will not respond to the remote. If you are handy with taking apart computers, then ...

...it somehow? It all depends on the Logitech remote's Harmony features. Can it you place your original Toshiba remote IR sensor up to the IR sensor on your Logitech and learn from the Toshiba

...IR type. The remote included with your TV may have inadvertently be switched to send the codes as an IR type while the TV will respond only to RF type codes. It may also be that the TV was changed to ...

...remote control features, volume, channel change, menu, ON/OFF do not work. What could be the cause? It can be the IR recveiver module is bad, you will need the scope to look at the signal output of ...

...IR is parts of this board.Not the IR problems,when tv is finally on the remote work fully everything buttons?No,could be remote control have problems.Tv might have DM power supply board

...remote IR receiver in the TV. Testing remote control: The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just ...