...big screen tv picture began getting smaller and began shutting off automatically. Now when you hit the power button it sounds as though its going to power but green light turns to green. Any help to ...
big screen TV "pop" once loudly. After the power came back on, we tried the TV and it does not power up, only makes a faint buzzing noise when plugged in. Is this TV trashed or can it be fixed? Please
...on and immediately shut off. Remote causes same issue if TV in standby power mode. Issue sometimes fixes itself but this is happening more often. No picture on my Magnavox Big TV RJ8530 S/N ...
Question about Mitsubishi Televison & Video
big screen tv. led turns on but no picture.Then tv turns off on its own. Need a ruff estimate on cost to fix. Your TV has a power supply problem. The power supply board is not sending the correct ...
...don't light, they are on the TV's PCB's, in the back (inside) of TV. You should call an Authorized Service Center to get an estimate b4 repair. If want to fix yourself come back. Good Luck, big
Question about Panasonic Televison & Video
...5 times 5 times LED blinks in Panasonic PT-47WX42 shows problem with convergence out chips failure as this tv has two big black ICs STK392-110 as convergence output, replace them to fix tv
Question about Televison & Video
...fix here tv is a mitsubishi projection screen model WS65711 is this tv worth fixing Replace Both of your convergence ICs they are big black ICs with STK on them use number on ICs if they are 110s use ...
...common in this set and the parts for this set are nearly impossible to find (I think by the model number set is newer than 92).I liked these sets but I would not invest big money to fix one this
. It's getting old now and the price of a new one . It might cost $ 400-500 big ones to fix it . Thats half the price of a new flat screen , cheap model mind you . But I still think it's not worth it
...has a big black square in middle of tv this is pip,,,if you can noy find botton on menu...unplug 5 min....return pkug to wall socket push and hold power botton for 5 seconds....this should fix
46 questions posted
Usually answered in minutes!
2,410 Questions
1,124 Questions
809 Questions
789 Questions
510 Questions