Samsung LN-R328W 32 in. HD-Ready LCD Television "remove cover" Questions

...remove the back cover of my Samsung LCD TV. I have removed two visable screws. Is there a trick beyong that? There is more than two screws holding the back cover on. I think it is more like 4 to 6. ...

the front panel on a lns5296d replacing front panel on a 52 inch tv you first have to remove back cover then remove boards and board brackets then remove LCD panel and that leaves just the front cover

...cover. Seems to be stuck inside the middle. U sure all the screws are remove.I have taken out many tvs and monitors,all way open.Recheck the middle might have some screws might miss or some covering ...

...it to protect the screen. Remove the 4 phillip screws from the stand. The stand can now be removed. The set can with a cover plate you can use to cover the opening. See page #86 in the User

...remove the back panel from a samsung ln22b360 I need help removing the back panel. Some of these sets use tabs inside the edge or gap of the cover--I use a thin putty knife to slide into the gap ...

...cover. > Remove the metal shielding covering the board > Disconnect the cables plugged into the board. > Remove the screws holding the board in place. > The new board should have the same ...

...cover. > Remove the shield over the T-CON board. > Disconnect AND reconnect the cables to the T-CON board. Be careful here. The connectors will have a clip which must be released to remove the ...

are not working. I got the new front cover. Could you explain me how to install it? Lay it down.Take the back off. Remove the guts from the front and reinstall them on the new front. Put back together

Remove the 8 or 9 screws around the edge of the back cover. 4) The cover "snaps into place" so you will need to carefully pry the back cover off and set it aside. 5) Disconnect all cables on the Power

...Remove the back cover. It has 13 screws around the edge, 2 on the connect area and 4 for the stand. ) Examine the top of the capacitors on the power supply board. It's the board in the center that's ...