...tv showed pink colors on the lighter colors in the picture. This morning it has two large black stripes across the picture. What could this be? We changed the lamp light 2 weeks ago! You may have not ...
Question about Toshiba Televison & Video
...tv, picture just went black (no picture, no sound, but still had power). Indicator light stays on blinking - will not turn off. When unplugging tv and plugging back in, indicator light comes back ...
...to use my part and charge me a service call? if you have a picture the engine is probably ok. this is a common problem with this set.it is probably the main chassis (DM or FMT) visit ...
...picture, and then would go out and all 3 LEDS on the front of the TV would flash. Had to pull plug from wall to get it to restart and the the same thing. After a while it failed altogether and the tv ...
...TV, the convergence ic's will have cold solder joints) 2: vertical ic issues. If they are different colored lines & the picture also bends, it's a convergence problem. Else suspect a vertical ...
Question about Mitsubishi Televison & Video
...tv turns on but the picture is black and there are colored stripes running up and down the right side of the screen. The sound is perfect and I can see the channels shown on the tv. Any ideas? ...
Question about Panasonic Televison & Video
...Picture of a set that needs the fluid changed. TV set after fluid change Solution #2 What you will need to do is replace the coolant and clean the crt. You can get a repair kit from ...
...picture & the red power light just blinks If it shuts off and then the power light starts blinking red or never turns on but the power light blinks red continuously that is usually indicative of the ...
Question about Hitachi Televison & Video
...ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and
Question about Toshiba Televison & Video
...to run but the picture is a mess -- it's the ICs. Use STK392-110T or STK392-118. Replacing these takes a fair amount of skill with a soldering iron and familiarity with TV service. Or a death
20 questions posted
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions