...5. When you are finished setting the time and date, press the "set" button to save. Setting an Alarm 1. Begin by pressing the "mode" button until the alarm screen appears. 2. Press the "set" button ...
...Setting alarms & so on require putting it alarm mode via the mode button. Use the reset button to move to the selected alarm (1-5). 4. Hold the start/stop button for three seconds to "set the alarm ...
...5. When you are finished setting the time and date, press the "set" button to save. Setting an Alarm 1. Begin by pressing the "mode" button until the alarm screen appears. 2. Press the "set" button ...
...display. Backup Alarm sounds after 5 minutes if no button is pressed. Turning off any Alarm or backup will not affect other alarms. ...
...SETTING TIME ON WATCH - AQUALITE MANUAL? To set time: 1) Press "Mode" button until Time is displayed. 2) Press and hold "Lap/RST" button until seconds display starts flashing. 3) Press "ST./STOP" ...
...5) Press "Lap/RST" once you are done to set the alarm. To toggle alarm sounds on and off: 1) Press "Mode" button until ALM is displayed 2) Press "ST./STOP" button to toggle alarm sounds on or off ...
setting the alarm, press the "set" button, followed by "advance" save and activate your alarm. 5. When you alarm sounds, you can deactivate it by pressing any button on the watch. Hope it helps. Thank
...Alarm is available in one Time Zone only. 5. Press 'A' to end set sequence. 6. Press 'B' to return to Time Telling Mode. ACTIVATING THE ALARM AND HOURLY CHIME 1. While in Alarm Mode, press 'C' to ...
...5. Press A to exit the setting mode. To test the alarm In the Alarm Mode, hold down D to sound the alarm. To turn an alarm and the Hourly Time Signal on and off 1. In the Alarm Mode, use D to select ...
35 questions posted
Usually answered in minutes!
271 Questions
253 Questions
167 Questions
74 Questions
61 Questions