Question about Timex Ironman 53151 Wrist Watch

1 Answer

Old model timex compact disc digital audio

Sorry, wish to set date on the above subject...

Posted by Linda Dyer on

Ad

1 Answer

Reynaldo Labaguis Jr.

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,157 Answers

Hi catlady05,

To set the digital time and date on your Timex Ironman, please follow the steps below.

1. press and hold the "set" button for two seconds.

2. Use the "advance" button to reach the correct hour.

3. Press the "mode" button, followed by the "advance" button to set the minutes on your Timex Ironman.

4. Repeat the procedure of pressing the "mode" and "advance" buttons to set the month, date, year and day of week.

5. When you are finished setting the time and date, press the "set" button to save.

Setting an Alarm

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.

Posted on Aug 15, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set alarm on Armstrong 45/7041 watch? Did not come with instructions


A= reset

B= Mode

C= ST/STP

D= Light  (edl)


•SETTING TIME AND CALENDAR 


1.For time telling mode, press 'B' three times. The seconds should start to flash. Press 'C' to zero out the seconds.

2. Press 'A' minutes will flash, press 'C' to set the minutes.(holding down C will advance the digits faster)

3. Press 'A' hours will flash, press 'C' to set hour.

4.Press 'A' date will flash, press 'C' to set the date.

5.Press 'A' month will flash, press 'C' to set month.

6.press 'A' The day of the week flashes, press 'C' to set day of the week.

7.Press 'B' to finish and it will return to the time.



IF ANYMORE QUESTIONS ABOUT SET FEATURES SUCH AS 'STOPWATCH, SPLIT TIME, SETTING 24 HOUR ALARM, ACTIVATING ALARM, OR SNOOZING THE ALARM'. FEEL FREE TO CONTACT ME @ [email protected] WITH 'ARMITRON WATCH' IN SUBJECT BAR AND I WILL SEND YOU PICS OF THE MANUAL.

-Savannah:)

Feb 14, 2015 | Armitron 457004WHT Womens White Nylon...

2 Answers

Date changes at mid day not at mid night.


Your watch is 12 hours out of step.The date changes ever second rotation of the hour hand.

If you advance the time 12 hours, the date will change at midnight.

You may have to re-set the date.

Sep 16, 2011 | Tissot PRS 200 Wrist Watch

1 Answer

I cant set the annalogue hands


Use the crown to set the time. Advance the time by turning it clockwise. Watch the day/date window and when the day/date changes that is midnight. Now that the a.m./p.m. mode is set correctly, advance the time to the one you wish to set it to.

Mar 28, 2011 | Watches

1 Answer

I have a Tissot Automatic PR 516 from the early 70s. Time is kept well. Date moves forward correctly but it is the wrong date. I am unable to turn back the date. I am able to turn back the day. Any...


The crown wheel (winder) should have 3 positions, (1) the normal winding position (3) fully out; at this position the watch stops and the time can be adjusted.

(2) This position is between the 1 & 2 and is used to adjust the day and date. If you wish to change the date by winding the crown backwards or forwards.

Since watches can very a little, if turning the crown when in position 2 the date does not change, pull the crown to position 3 and turn the hands until you pass the midnight position, when the date will change and then re-set the time. If you wish to advance the time more than one day, when it changes, wind the crown backwards past the midnight position and then wind it forwards again. Repeat until the correct date is showing and then re-set the time. The exact distance you need to turn the crown to change the date will have to be found by experimenting!

Feb 06, 2011 | Watches

3 Answers

Setting time & date on Philippe Starck Fossile watch ph1080


hold the left, bottom button (marked ....) for a few seconds....then press the top right button (marked with 1 dot) to change between the hour, minute, date etc. use the bottom right button to advance the flashing number, and when finished setting time and date, use the bottom left button to stop the numbers flashing and return the watch to normal. hope this helps, this is also how to change the date for the other question asker (works on 2 other starck/fossil watches i have and i assume the controls are the same).

Aug 08, 2008 | Fossil Philippe Starck PH1035 Wrist Watch

5 Answers

Setting Day/date on Helbros wrist watch


As an extra tip, to advance the date a little faster, you can turn the stem and rotate the hours past midnight and keep going until you pass 2 AM, then you can wind backwards, going past about 8:30 and you will hear a 'click', then you can go past 12 am again and the date will change. This makes it a little quicker to advance the date several days.

May 13, 2008 | Watches

4 Answers

Need help with Kenneth Cole Reaction Watch - setting date/time.


for a watch face that has a day of week, date, and moon calendar: There are two click points on the set-pin. pull out 1 click to access date/moon calendar; spin clockwise to set the moon calendar. spin counterclockwise to set date.

pull out pin 2 clicks to set time, just like any other watch

Mar 06, 2008 | Watches

2 Answers

Seiko Diamatic Day Date Automatic Watch No: 219050


I have a Seiko Diamatic 780632. To set the day and date, pull the crown once and wind it upwards (away from you) to set the date; winding it downwards (towards you) will set the day. To set the time, you have to pull the crown twice and wind it towards you.

Oct 24, 2007 | Watches

1 Answer

How to change the date on cartier santos chronograph watch


There are two positions for the setting crown all the way out is to set time,one click out to set date.To set the date you must first set the time by moving the hands around clockwise until you see the date change(midnight) then continue around to the correct time.Then push crown in on click and set the date

Sep 24, 2007 | Cartier Santos W20056D6 Wrist Watch

Not finding what you are looking for?
Timex Ironman 53151 Wrist Watch Logo

463 people viewed this question

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

The Knight
The Knight

Level 3 Expert

76280 Answers

STEVE

Level 3 Expert

34821 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...