JVC HR-J633M VCR "release tape" Questions

tape, etc. etc. NOTE:: some VCRs use PAUSE 2nd time to release and continue recording, while some machines you must press RECORD button again to release PAUSE. you must expirement before begining your

...release the tape without damage to either the tape or machine?? i had this model once upon a time. the only way i can think of is to try a mini screwdriver to push in the tab on the vhs tape. maybe ...

release the tape. Hi, locate the motor that powers the cassette carriage. If there is a worm gear in the mechanism, you must hand cycle somewhere between the motor and that gear. Once again, the shaft

...down, what can i do to make it stop reading a tape? The tape is stuck in the vcr and doesn't get released. How can I remove

...tape. If it binds up on something, look and see what it's binding on, release it from that part, and continue removal. It should come right out, and if it doesn't, it's not sufficiently released. 8. ...

...tape (little square button to release the door also look (happens if you use same tape a lot and fast scan with it) to see if the bottom edge of the tape has curved waves in it--should be perfectly ...

...remote control or eject button on fornt, IT won't respond. take the top off the VCR, you will see where the tape is hung up. Reach down and release the tape and pick it up, now close the

...tape out? Thanks. There schould be a release buuton on the rear of the machine. It's usually recessed and may be difficult to see. Press this with the yip if a ballpoint pen and extract the tape. If ...

...at least be able to get the tape out by simply manually turning the tape deck motor until the tape releases and exits the machine. It isn't always easy and can take a while to do if your turning it ...

...tape release gear that will eventuall wear out through time, also, sometimes the rubber belts wear out and throws the timing off. That would be the first two things to check. Make sure spring is not ...