main otherwise sub will only work with Dolby Digital LFE signals. LFE plus main setting will allow sub to output low freq's that would normally go to Front Speakers. Refer to Owners manual setup Info
Question about Denon Audio Players & Recorders
...configuration ~ set the sub to LFE+Main. No changes. I've been told that I need to turn on the Digital connection? If that is the solution, I can't find the correct setting for Digital
Digital Opitical (toslink) to the my Denon AVR-1508 and a 5.1 speaker system hooked up to that. My issue is that the only mode that seems to play the subwoofer is the DOLBY PLII CINE mode, and in that
...LFE (low- frequency effect) signals found in Dolby Digital or DTS sources. Choices: SWFR (subwoofer), FRONT, BOTH ? Select SWFR if you connect a subwoofer. LFE and low-frequency signals from other ...
Question about Pioneer Audio Players & Recorders
...Digital or DTS source you are listening to may not have an LFE channel. • Switch the subwoofer setting in Speaker Setting on page 40 to YES or PLUS. • Switch the LFE Attenuator Setup on page 61 to ...
...Digital receiver, using this connection method will take away systems ability to accurately control the low frequency effects of a soundtrack. Good Luck, BB No. Since you didn't mention what specific ...
lfe input on my sub and nothing. the volume is up on both receiver and sub. The green light (indecating the sub has a connection) is on dolby digital is on the receiver and still nothing. i have tried
Question about Yamaha Audio Players & Recorders
...LFE input connected to the sub output on the receiver. Is this correct? if you do not have the digital hook up from the tv to the reciever then you will not get the subwoofer sounds or the dolby ...
Question about Pioneer Audio Players & Recorders
...into the digital source. If a source-dependent LFE channel is encoded, it should light up. Check the source's setup to make sure it knows you have a sub and is configured for a discrete LFE
make sure sub is turned on in setup mode. If Front speakers are sent to large I believe the only time sub will work is with Dolby Digital Lfe signals. If sub is turned off of course it will never work
68 questions posted
Usually answered in minutes!
46 Questions
28 Questions
36 Questions
35 Questions
26 Questions
