Question about Mitsubishi Televison & Video
...error code and as per your guidance I replaced the pico fuses and the two STK392-570 convergence chips. The set powers on now and I get a 1-2 code which I believe is a no errors detected. The problem ...
Question about Televison & Video
...error code is 2-2 We replaced the 7 capacitors and the f9a04 and f9a05 and it still doing same thing. The guy gave us 1.5k-ohm Resistors 1/2 watt to replace them with. They do not look the same but ...
the problem/solution? Thanks, Brad The TV indicates an error code 22 (short circuit protection). Check 2 STK392-570 convergence IC for shorts and 5amps pico fuse for open. I usually replace both STK's
...Error code 1-2 F9A04 & F9A05 Open. If F9A04 and F9A05 are open the convergence ICs will need to be replaced as well as the two pico fuses. You will need two STK392-570 Convergence ICs and two 5 amp ...
Question about Mitsubishi Televison & Video
...code what is it and how do i fix it What you have is short protection--it means one of two pico fuses on the middle board is bad and it and the two STK-392-570 chips it uses for convergence are going ...
Question about Mitsubishi Televison & Video
...Error code blinks 2-2. From reading it sounds like the convergence chip and fuse. I'm confused which chip I need. STK392-570 or STK393-110. And are there one or two chips? Also can you email me ...
Question about Mitsubishi Televison & Video
E-mail address is [email protected]. Happy Thanks Giving God Bless!! If you got a 12 then that means no code error, check again and make sure. or go to www.ctechnicians.com and read what is said
error code 2-2 2,2 error is short protection in this model. WHAT IT MEANS IS ONE OF THE TWO FUSES THAT PROTECT THE CONVERGENCE CIRCUIT IS BLOWN; This model uses 2 of the STK-392-570 CONVERGENCE chips-
...error code. Anyone know what this error code is and how to fix. Thanks 2,2 error code is short protection---98% of the time it means one of the two soldered in pico fuses this set uses is ...
...error code: if 2,2 it is a blown pico fuse and the chips also must be replaced. I have start to finish step by step instructions that are available if the customer selects me ...
154 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
482 Questions