Question about Optoma Office Equipment & Supplies
Optoma projector overheat issue - fan comes on but switches off optoma ep721 projector switches on ok, the fasn comes on and then it switches itself off and gives an overheat LED. Most projectors have
LCD overheats then the lamp turns out The fan is running but the machine quickly (5 minutes) overheats. Lamp turns out. Is there a fix? clean all filter and do not block any ventilation slots with any
Question about Sanyo Office Equipment & Supplies
overheat reset switch for Sanyo PLC-Z4 projector cannot find the overheat reset switch for my projector. Do you know where it is. My manual makes no mention of it. My new bulb is not working. check ...
Question about Radio Shack Office Equipment & Supplies
my cinego d1000 overheats 5 minutes after i turn it on overheats after five minutes Replace the heatsink and fan with a better one and make sure the proper amount of thermal paste is used (about 1 ...
XB31 projector overheat Hi, well the projector will work for +/- 1h30 then overheats and shuts down. The light indicates overheat, not temperature problem.. in the specs.. anyways, i put a new lamp in
Question about InFocus Office Equipment & Supplies
optoma gt700 makes loud high pitched noise then overheats I have a one year old gt700 optoma projector. i turned it on tonight and it started making this awful high pitched noise like something ...
Question about Optoma Office Equipment & Supplies
...overheat. also make sure the fans are spinning. if it still blinks, replace the temp sensor. if it overheats alot, the sensor will wear out from excessive
Question about Mitsubishi Office Equipment & Supplies
Our HC 6800 projector will work for about 10-20 minutes before displaying a solid red screen and shutting off. Projectors shut off when they overheat. They overheat when air does not move through the ...
sharp xg-ph50x projector overheating we just added a new lamp (number 2 right side) and ever since then it has started to overheat and switch itself off. we have cleaned all the air vents but it still
sanyo pcl-xu50 flashing red power light when i turn on my projector the light goes green it powers up for about 20 seconds then the power light changes to a red flashing one for about 10 seconds then ...
11 questions posted
Usually answered in minutes!
171 Questions
1 Questions
1 Questions
11 Questions
11 Questions