Dewalt DC011 AM/FM Radio "station memory work" Questions

...memory. Otherwise the raido works fine. OK HERE'S WHAT YOU DO 1. USING THE UP AND DOWN TUNING, TUNE IN THE STATION 2. PRESS THE MEM SWITCH (LEFT SIDE OF ROUND SWITCH) 3. PRESS STATION LOCATION 4. ...

the Radio Station you want to save. 2. Press and hold the Memory button that you want that station on, 1, 2, 3, 4. The display will flash the station number, when it stops flashing, the channel is set

...seems that a few steps are missing in the manual. I can't get the radio to auto-scan FM and put the stations in memory pages 99 and lower. Anyone figure out the correct series of keystrokes to make ...

...AA batteries they are located inside the battery chager. these batts. control the radio and memory stations. Check your fuse inside the

...working , tuning nob turns but the station dos not change,stuck on fm no sound Many of these radios have memory backup batteries and when they become weak or dead the microprocessor becomes

My Dewalt dc011 will not hold memory anymore. Every-time powered up I must re-program stations Worked fine for two years and still holds channels if not turned off Fuse or some thing keeping the ram ...

Preset Radio Statios Roberts R309 Radio. I just need to know how to program the preset radio stations please. I just dug out the manual and have now programmed a preset. Instructions: 1) Make sure ...

...memory is divided into 10, 20, 25, or 50 pages.2. The second code fixes the AM frequency gap between stations. Enter 09 for 9kHz or 10 for 10 kHz (in North America)The 3rd code selects the type of ...

station or time Dewalt not abused. Plugged in AC outlet and radio must be set each time it is turned on. The fuse inside is good...checked that. Two AA batteries are good. Any ideas? Hi the only other

...memory is divided into 10, 20, 25, or 50 pages. 2. The second code fixes the AM frequency gap between stations. Enter 09 for 9kHz or 10 for 10 kHz (in North America) The 3rd code selects the type of ...