Kenmore 16872 Built-in Dishwasher "circulation pump rotating arms" Questions

...circulation pump replacement So I screwed up and didn't regularly clean my fine filter on my whirpool - and it fried the circulation pump. I believe this was the problem because when i performed a ...

...circulation pump. I had the same problem on my CW496. The original circulation pump was pretty cheap and nasty and although it was still working had lost a lot of power and was struggling to turn the ...

are not clogged and both are not rotating. any assistance would be appreciated what makes the circulation in the dishwasher? the circulation pump. just check the water going in and the water going out

...circulation pump impeller. If something has jammed the impeller, you would have to remove the dishwasher, remove the tank, remove the circulation motor and clean out the impeller...Catriver...post ...

...back of the unit. There are vent fins that you can safely rotate to see if the motor was jammed, if after rotating the motor the unit fails to run, need to replace circulation pump. I hope this

...not rotate around. is this a motor or pump problem? motor it could be your circulation pump is not pushing the water round the system . to replace this part if that is the problem is quite expensive

pump or something that makes those spinners go around? the spray arms are rotated by water coming out of angled jets, this water being forced round by the main circulating pump. suspect it may a fault

...soap in the cup. If the DW does not drain the pump could be clogged or has failed. That would also cause the spray arms not to rotate and not circulate water to dissolve the soap or clean the ...

rotating; check your user's guide for proper loading methods. the holes in the spray arm can be plugged from food particles or other debris, like coffee grounds; remove the spray arm and clean out the

Very weak stream from lower spray arm with no rotation and no water from upper spray arm time for a new circulation pump