...water left in botton of washer. The filter is probably blocked. It is inside the base of the machine. Take out the filter and clean it and also clean out the filter well as that can also hold quite a ...
water valve. Owners manual says to remove 4 screws to access but shows no picture or discription. Only place where 4 screws out are on the botton of where the pipe comes in. which means the unit would
...water value has been turned on, however when hitting start cycle, dishwasher does nothing and normal cycle blinks. What needs to be done in order to get this dishwasher to function? Are you hitting ...
...water was turned off in the middle of operation.Now when you turn it on nothing happens.When you press the main switch on the door no led numbers cone up like before.When you then press any of the ...
...hold the "time delay" button, and the "light wash" button at the SAME time for THREE seconds. You really have to push those suckers in hard, thanks to GE's awesome design on this panel. After I did ...
Question about Kenmore Dishwashers
...water in the bottom of the dishwasher. I changed out the control board, and same symptoms occur. The real baffeling part to me, is if I wait a few days, then I can select Normal Wash and it will run ...
213 questions posted
Usually answered in minutes!
485 Questions
214 Questions
206 Questions
175 Questions
145 Questions