remove the cabinet, at the lower center there is the water pump, remove it and move it out or the way from the motor. put back the cabinet and try to turn it on. if it comes on then you have a blocked
...The complete instructions you can find here: http://www.askgene.com/2007/01/26/whirlpool-kenmore-washer-direct-drive/how-to-remove-the-cabinet-on-whirlpool-direct-drive-washer-2/ Gendos...post ...
...whirlpool duet sport washer? Prop up the lower front edge of the washer or cushion the rear top edge with cloth and lean the washer against the wall for easy access to the three screws securing the ...
Question about Whirlpool Washing Machines
Whirlpool Estate washer. Removed the cabinet. No leaks from the water pump, hoses or inlet valve. The tub leans a little toward the front of the machine. When filling/rinsin See question. It is common
...whirlpool 6ALSQ8000JQ0 have a lint tray that i can remove and clean?? i keep finding freshly cleaned clothes with lint on them.. thanks Check inside the cabinet between the bottom of your tub and the ...
...clothes pin for the lid-switch to see where she could adjust the load, afterwhich it stopped working. The switch seemed to not be actuating after that. How is that switch tied into the whole spinning ...
...clothes. Help!! This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine. First, see the Sears ...
...clothes wet. If the agitator is working during the wash cycle,then the lid switch is bad on the spin cycle. This video will show how to remove the cabinet to replace the lid switch. Copy and paste ...
...clothes, timer ok, lid switch is ok, motor is ok,drive coupling is ok, would there be a belt or coupling inside the transmisson?looks like theres a clutch or some kind of break above the ...
Question about Kenmore Washing Machines
...clothes are soaking up all the water. This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine. ...
1,909 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,023 Questions
908 Questions
