Question about KitchenAid Washing Machines
...is now making their own Duet models and the Maytag front load machines and the Kenmore He2 2t and 3t and 3t steam and the 5 with steam washers. KitchenAid is high end Whirlpool. Haven't seen them ...
HE 3t Front Load Washer Kemore Elite HE 3t front end loader washer just makes a clicking noise when computer is engage to so something. Door Latch reamains locked and will not open. Is there any ...
Question about Kenmore Washing Machines
he 3t error code f6,washer will not spin,door will not open he 3t error code f6" , washer wont spin , door wont unlock "f6" error code means that there a miss communication between mcu(motor ...
Question about Kenmore Washing Machines
Kenmore HE 3t started leaking from the side when filling I have had my HE 3t for 3 years without incident, today while washing it made a strange noise, then finished the cycle. After another load I ...
Question about Kenmore Washing Machines
Where can I find a door latch for the Kenmore HE 3t Where can I find a door latch for the Kenmore Elite HE 3t. Continue to get a dl (door latch) warning and washer will not start. Found the plastic ...
Kenmore Elite 3t washer How do I disconnect the electrical wires on the drain pump? unplug machine, go down to the pump motor and squeeze the tab and connector and pull it away from the pump.
The door won't open. There are no error codes displayed. I have a Kenmore Elite HE 3t. open the bottom panel by unscrewing 3 screws. reach up towards the door lock and pull a level to manually unlock ...
kenmore he 3t shows a door lock code even after I replaced the lock but only about 3 or 4 weeks apart. could be a faulty computer board
seconds into wash cycle kenmore he 3t flashes f11 error. already replaced motor, ccu, mcu and cleaner pump. What else? the only thing left to check on this code is the wiring harness??
Question about Kenmore Washing Machines
error code 32 on a brand new kenmore HE 3T wash machine Error code 32 on a brand new Kenmore HE 3T wash machine Pressure Switch failure - remove the hose at the top of the machine, and blow in it to ...
74 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions