Question about Sewing Machines
...6500 sewing machine? Hi, I have a Morse Apollo 6500 Sewing Machine. Currently the needle is left of center as viewed when sitting down to sew. Nothing I do can move it to center. The 6500 comes with ...
Question about Sewing Machines
...6500. I was free motion sewing when my machine suddenly would only do one stitch at a time ( will only do a stitch each time I press the peddle) I have tried turning off the machine, cleaned all the ...
...6500 How do I open the panel to connect properly? I did clean the machine. I have a light on the panel but no information is displayed. Under the cover of your machine where the feet are stored, on ...
Question about Janome Sewing Machines
I have a Janome mc 6500 and the bobbin thread keeps getting stuck around the feed dogs? i have cleaned and rethreaded evrything..not sure what to do next? try changing the needleclean under the needle
Question about Sewing Machines
...6500 I got at an auction. It sews for a bit then stops until I turn the wheel manually. I believe it needs a new belt. where I can get one and is there a how to video? Older mechanical machines, like ...
Question about Janome Sewing Machines
...IT AGAIN SEVERAL TIMES. I HAVE CHANGED THE BOBBIN AND THREAD. I HAVE TAKEN THE BOBBIN CASE OUT AND CLEANED OUT WITH CANNED AIR AND Q TIP. I HAVE CHANGED NEEDLES SEVERAL TIMES. I HAVE RAISED AND
...6500 that was working just fine. The last time I opened the machine the display window wasn't showing anything. The machine made the usual sound as it came on but no display. It will sew but keeps ...
...6500 sewing machine. About all you can or should need to do is remove the bobbin case and clean the lint and stuff out from under it. There is a wick in the center of the hook( the part the bobbin ...
...machine. I replaced this part on my Janome 6500 for $35 after damaging it. I'd suggest that you contact your local Elna dealer and get a price for the replacement part. Of course if your machine ...
Question about Janome Sewing Machines
The bobbin thread keeps jamming in my janome 6500, I have cleaned the bobbin housing and replaced the bobbin tried tendinitis settings but nothing works. Help! ...
743 questions posted
Usually answered in minutes!
193 Questions
102 Questions
90 Questions
79 Questions