EnGenius DURAFON1X DuraFon 1X System Phone "enter registration id 4" Questions

...will be displayed. Step 4: Using the handset dialpad, enter the base ID number. Repeat the registration procedure for each system handset. Each handset is assigned a number in the order of ...

...reset phone to its initials, or remove no registration sign? Try to this to reset BS 1. {menu} 2. select ?SETTING BS?. 3.?INPUT CODE? is displayed. 4. Enter "0" (zero) 5. enter your PIN (usualy

enter the registration mode b. Press and hold the base?s Registration (REG) button for 2 seconds until 4 LEDs light up. (Located on the base where you plug in the phone jack) c. Press handset key ?1?,

...enter the correct information. 4. Press SEL to complete the registration process. 5. Once a valid base ID code has been entered, the display will blank for a second or two, and then show: 6. If the ...

...enter the registration procedure as below: 1. Place the unregistered cordless handset on the charger. 2. Press and hold v for 4 seconds on base. 3. Release v once IN USE LED is flashing. 4. A ...

registration problem, the errant handset(s) and the base have lost identification with each other. NOTE: the CS6429 works a maximum of 5 handsets, so you have a "fully populated system". You will have

registration problem. Try de-registering the handset(s) and re-registering to your base. NOTE: the CS6429 handles a maximum of 5 handsets. If you have a handset displaying "Handset #5" then you have a

...Registration,press OK button to enter the menu.Use arrow button to scroll to a specific handset and press OK button.Press ok button to confirm the selection.You will hear a confirmation tone when ...

enter the menu. REGISTRATION 1YES 42NO - - -shows in the display. The default setting is 2NO. 3. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the caller ID-volume ( 6 or 5) button to

...has been re-registered During registration,you must enter the 15-digit ID number of the telephone base. To find this number, go to the base, select MENU, scroll down to DISPLAY BASE ID, then select ...