is not dispensing the cleaning solution, here are some troubleshooting steps you can try: Check the water tank: Make sure the water tank is properly seated and securely in place. Also, make sure there
...FLOW GAUGE WAS NOT SPINNING, SO I CHECKED AND SURE ENOUGH NO WATER WAS COME OUT. I CHECKED AND ALL THE TUBS AND EVERYTHING ARE IN THE RIGHT PLACE AND HAVE LIQUID IN THEM. HAVE TRIED PRIMING CLEANING ...
Question about Bissell Vacuums
...flow gauge is not turning and the formula is going into the bladder. There is no spray on the clean shot and no water coming out of machine. If you look at the location where the tank connects to the ...
...flow-indicator is not spinning and will not spray any water. First, check the pump belt to see if it is broken. Water won't spray if the pump is not working. If you don't know where it is, see this ...
...Water Tank and the Formula Bottle to make sure each has a red (or black) auto-load gasket attached and facing outwards and that the ventilation tube is not submerged as it allows air in so the ...
...Water Tank and the Formula Tank to make sure each has a black or red rubber gasket attached. The rubber gasket sometimes sticks to the base of the unit and detaches from the tanks. When this happens, ...
...water flow. All that is needed is to remove the plunger and reseat the seal correctly on the shaft of the plunger. Check by veiwing the plunger move up at least a 1/4 in from seat on container. This ...
Question about Bissell Vacuums
...water/cleaner. This takes alot of extra time. I have looked to make sure that all of the parts are in the right places and latched down correctly. I'm just not sure which part is not woking. If you ...
...water with very little foam comes out onto the carpet. I have the suds control valve all the way to the left but no luck. No suds is dispensed in the tray when the Kirby is pulled backwards. I used a ...
261 questions posted
Usually answered in minutes!
625 Questions
381 Questions
207 Questions
187 Questions
