Jura Capresso Impressa S9 Coffee Maker/Espresso Machine "message ground fine" Questions

...ground coffee in funnel - that works fine. It doesn't seem like anything is stuck in the grinder. I would love to get some advice on this the Jura impressa S9 comes up with messag fill beans but when ...

...message appears. I must then push the steam button and rebrew another shot. This may happen a couple of times before I can get a single shot of espresso which consumes much coffee and is a real pain. ...

...ground  "sludge".  It was making a weak electrical connection between the two contacts.  As soon as I took a fine scrubber sponge to get rid of the build up - the Empty Tray message ...

...message again. Is there a sensor somewhere that's goofy? If the machine says TRAY MISSING it's the contacts at the back so clean as other people have stated, you can also use a cardboard nail file to ...

...fine. On my machine, I found a plugged fitting on the steam vavle. You do have to remove the side covers to service this. I removed the valve(make sure the power is UNPLUGGED), and took off the metal ...

MESSAGE GROUNDS TO FINE NOTHING If the grounds are too fine the water will pool and not wash through the grinds which could lead to an over flow. Proper size grind is important. Use an alternative ...

...message GROUND TOO FINE ADJUST MILL After years of use I now get the 'COFFEE GROUND TOO FINE ADJUST MILL', it will then try and deliver hot water through the system but only a small amount comes out ...

...message disappears. do this a few times, mine is working fine after doing that. hope this helps Either your grind is to fine or your brew unit is getting plugged. Try using the pre ground button but ...

message that the ground is too fine and to adjust it when I am trying to froth the milk. I have cleaned it, adjusted it , taken all the beans out and it still gives me that message and won't steam

...message but plenty of beans in hopper but not packed down. In the past it has been cleared by vacuuming the grinder. It usually starts working fine the following day without attention. Any fix? Ben ...