20 Most Recent Jura Capresso Impressa E8 Espresso/Coffee Maker Questions & Answers

Open the tap with frother spout off. This happened to mine and I took the frother tip off and opened tap with tip off. Water filled and I closed tap...Machine returned "Ready". I heated water in microwave for three minutes- placed frother tip in hot water and all kinds of gunk came out. Lesson learned- Do a thorough cleaning of frother by immersing it in very hot water at least once monthly- even if you don't use it

Jura Capresso... • Answered on Apr 10, 2019

try and do a heavy duty de scale of the machine , put some descale directly into the tank, heat up ( de scale works better at high temp) select rinse, clean or flush programme. the vast majorty of probs. are due to limescale in the narrow pipe work.

Jura Capresso... • Answered on Apr 08, 2017

Difficult to say without the machine in front of me. Normally you get this response if no beans fall into the grinder. Are your beans oily, sticking together and not falling in? Normally freshly roasted beans esp dark roasts are a bit oily. If so then you can change roasts, brands or mix with another type. You might try to adjust your grind per the manual. (turn knob inside the bin while the grinder is grinding) see #8 page 12. If the beans are falling in and grinding and you still get this msg I would say you have a grinder problem. http://capresso.125west.com/e8_manual.pdf

Jura Capresso... • Answered on Mar 13, 2017

The hooks in the lid are tricky to remove without breaking. It is best to remove the top cover. To do so you need special key to open the machine. Order the special key from the link below. Watch the video posted on You tube channel "Parts Guru USA". Descale the machine every three months using manual descaling. Jura instructions are misleading and create unnecessary error messages. Services Unlimited Inc Parts Guru Since 1988 Services Unlimited Inc Parts Guru Since 1988 Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a

Jura Capresso... • Answered on Oct 23, 2016

I think you ment kaffeestudio.de and their webshop redirects to
Eg http://www.juraprofi.de/anleitungen/E-Serie_Innen.pdf

Jura Capresso... • Answered on Jan 29, 2016

It is possible that the timer unit in the maker is defective and need to be replaced. I would suggest you move the coffee maker to a different outlet and see if you have the same problem. If there is a short in the mechanism or a bad connection in the timer it could be experiencing a thermal shutdown.

Jura Capresso... • Answered on Jan 05, 2016

For Jura F7 Series, "Tray Missing, can't put it back in". With a small flashlight, look in to the cavity which the tray and grounds container reside in. Along the right side above a slot to the end, you'll see a white micro switch. with a "Tooth Pick" simply press the switch inward (to the right) and hold till the machine cycles the Levcer / Flap up and out of the way.! Put your tray and grounds container back in and begin brewing!! -dh

Jura Capresso... • Answered on Dec 09, 2015

Check the membrain regulator for leaks. Those end up leaking over time as they get older. They look like this: http://i.ebayimg.com/00/s/MTYwMFgxNTk5/z/XMAAAOSwl8NVdZz4/$_35.JPG and are located on the outlet side of the water pump. They can be bought for about $50-60 and just screw on to the outlet side of the pump.

Jura Capresso... • Answered on Oct 21, 2015

Operating Manuals - Jura Capresso Coffee Machines

capresso.125west.com/html/operating_manuals.html Operating Manual Impressa F9 and F9 Limited Edition. Operating Manual Impressa F7. Operating Manual Impressa E8. Capresso C1300 Superautomatic ...

Jura Capresso... • Answered on Sep 06, 2015

I would say that something has a hole in it, but if it doesn't it might have bad quality, and if it isn't that because the place where you bought it from sells good machines, then it still might have something that went wrong or something was misplaced. I'm not sure either, but that's what i think is the most likely reason. You could always try ask the place manager and ask him if there is anything wrong with your machine. Hope it ind of helped!

Jura Capresso... • Answered on Jun 03, 2015

Hi, I made a video how to fix your Jura step by step, good luck... http://fixandparts.wix.com/nicknicoloudis#!jura-coffee-machine/c15gy

Jura Capresso... • Answered on Mar 23, 2015

Hi Glen MANUALS & Instruction Books are On Line The drivers & Books & manuals are more than likely on the manufacturers site. They usually can be downloaded for currently available devices. Search their support area for your specific model of device. Try Google Search for a Manual or PDF File for the specific brand & model number. Also check these Sites: www.retrevo.com .... Manuals www.office.manualsonline.com

Jura Capresso... • Answered on Mar 05, 2015

Sounds like you might have more than one problem. From page 12 of the manual... NOTE THE LAST LINE. "8. ADJUSTING THE GRINDER ...... • Open the lid of the bean container. • While the grinder is running turn the grind selector switch to the desired position (Fig. 6). -The smaller the dots, the finer the grind. -The bigger the dots, the coarser the grind. Important: The grinding grade can only be adjusted while the grinder is actually grinding."

Jura Capresso... • Answered on Oct 23, 2014

So did you empty the grounds? Pull the plug and plug it back in. There is an encoder disk that spins around to control the mechanical movements inside the unit. Some mechanical piece is not where it is supposed to be and the circuit board it waiting for a sensor to clear. Cycling the power will normally make all the mechanics reset to the start position and clears errors/jams etc.

Jura Capresso... • Answered on Oct 23, 2014

if the machine not new use a decalfier to get that calcium off calcium end up to be like concrete put the product in the machine 1 part water 1 part product valve on let water drip for a few second turn off let the product seat inside for a few minute repeat untill emty after rinse the machine with water a few time that stuff is very corosif hope it help cheers

Jura Capresso... • Answered on Aug 20, 2014

Not finding what you are looking for?
Jura Capresso Impressa E8 Espresso/Coffee Maker Logo

190 questions posted

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers


Level 2 Expert

100 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Impressa Jura Capresso

  • Impressa Jura Capresso

Most Popular Question

empty grounds message stays

  • Coffee Makers & Espresso Machines