Creek 5350SE Amplifier "power speakers" Questions

...speakers to the MAIN and MONITOR outputs on the front of the unit with 1/4 inch INSTRUMENT rated cables (NOT speaker cables). To safely leave the power amps in the XR8600 with no output loads, plug ...

...speaker and input connected Check speaker to power bank protection circuit. The circuit is faulty indicating to the power amp that speakers are disconnected that shuts down the amp to protect the ...

...speakers and then power up the amp. If it comes on, then you've probably got either a cabling or speaker issue. Double check by trying the amp volume (no source, no speakers) and ramp it up slowly to ...

...power down when there is a problem with the amp, usually a shorted output stage, but could also be shorted speaker wires or damaged speakers, it's a self protection mechanism do you get sound from ...

sound how to bridge my power amp to get the max out of it/? Hi monmax, I hope you are aware that in bridged mode your amp will become monaural (single channel, double power). If you still wish to ...

...power for two speakers i need how much is the best watt power for two speakers i need for this amplifier?A509R Amplifier? add watt power for two speakers together(100 watt as example)your amp power ...

...effect on the power amp. Hi, Your right, the remote will not switch the speakers. There's no remote input on the power amp, so there's no possibility to switch between A and B speakers. regards, ...

160; In short, you have to select 4Ohms speakers, haveing more than 50Watts power handiling capacity.  Remember, as Watt capacity of speaker increses, the cost will also increase considerably. OK

power. As for blowing out your speakers, that far more likely to happen with a low powered or cheap amplifier like the GLI A-6300. A low powered amp will quickly burn out a speaker if driven too hard.