At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The power for the data link connector is from a 25amp fuse Number 7 in the IP fuse box. As long as the check engine light is on the computer has power. The main computer power is from two ECM fuses in the box near the battery. The fuse locations should be in the back of your owners manual.
eic located in main fuse box is under the hood in main fuse box,lift lid off and location will be diagram on inside of lid.you can reset that light by disconnecting positive cable from battery for 10mins. that will reset your whole computer. thank you for choosing fixya.com
If it's anything like the Tiburon, there are two different locations, depending on which engine you have. The 2.0 liter 4 cylinder computer is located under the dash, driver's side, near the steering column shaft...
On the 2.7 V6, it's located on the passenger side, front A pillar near the glove box..
The computers are normally located very close to the firewall, or tucked under the dash in the engine bay. I have also seen them put behind the glove box.
×