Volkwagan cabriolet 2002

It requires a reset code after the battery is removed , the code should be in the user manual or on a card .

Tip....the code is sometimes put on the bottom of the ashtray just remove it and flip it over should be 4 digits

enter your radio code using buttons 1-9 on the radio panel if you enter the correct code your radio will beep, so if your code is for instance 1234 press 1 press 2 press 3 press 4 and listen for a beep . if you dont hasve the code you will need to visit a main agent who can retrive it for you
hope this helps

Press the station buttons if the code is 3 6 5, press 1 three times press 2 six times and so on when all the code is in press the next button this should bring on the radio.

you may have entered the wrong code or not pressed "enter"button after using code.leave to rest overnight then try as it may be in failsafe mode.

LOOK IN GLOVE COMPARTMENT.FOR THE OWNERS MANUAL.IT WILL TELL YOU HOW TO PROGRAM OR REPROGRAM YOUR RADIO.IF YOU DONT HAVE A OWNERS MANUAL.YOU WILL HAVE TO GO TO THE MERCEDES BENZ DEALERSHIP.THEY PROBABLY CAN PROGRAM IT SO YOU WILL HAVE SOUND.ALSO CHECK FOR A MUTE BUTTON.ON RADIO PRESS IT .YOU COULD ACCIDENTALLY HIT THE MUTE BUTTON AND SILENT RADIO.IF MUTE BUTTON DONT HELP.ITS PROBABLY A DEALERS FIX.I TELL YOU BACK IN 60S 70S 80S YOU COULD GO TO RADIO SHACK BUY PIONEER AND ALPINE RADIO PUT IT IN YOUR CAR.TURN IT ON.DIDNT HAVE TO PROGRAM CODE IT. LIKE THESE NEW RADIO SYSTEM.

Hi

You need to press the TP & RDS buttons at tthe same time, then enter your code by using buttons 1 to 4 on the radio, then press TT & RDS again. Good luck.

Chris

You need your radio code its 4 numbers, you use your radio preset station button to change the # press the 1 station button till you put in your code then the # 2 preset station # then 3, then fourth preset. You should find your code in your service manual. when your code is in, press the + or - button on the station search, or refer to your manual. good luck

===================================Philips Renault Code Entry 
 
Turn on the radio and the display will show 'CODE'
 
Use the steering controls for code entry.
 
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [¬ ] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ] button then rotate the thumb wheel for the correct fourth digit
 
If the correct code is now shown on screen, 
press and hold the [¬ ] button for up to 10 seconds to store the code 
===================================

Do you mean after you have typed in the code, you don't know what other button to press? According to the manual, that is the right side (arrow) of the seek/track button located on the left side of the radio. Did you need the number from the side of the radio in order to get the code? Mine is stuck in safe mode as well, and they said I needed to havfe the radio removed to find the number on the side of the radio, along with the vin number. Does that sound right?