How to fix 1997 ford contour computer code p0708
This code indicates a problem with the transmission range selected switch, this switch is on the transmission case where the shift cable attaches, when u select a gear it sends a signal to the computer control that u want lets say Reverse by sensing the range selector switch feedback, replace the switch will most likely cure the code, then clear the code and drive a few miles.
here is a picture and a part number and priice for the switch, source is www.rockauto.com
this switch is also called a "nuetral safety switch"
STANDARD MOTOR PRODUCTS Part # NS134
w/ A.T.
$33.79
Thank you right on the money if i had took it to transmisson shop they would have got me for a few hundard bucks i fix it my self thank you,
×
I have 1996 ford contuor and I'am having the same problem what should i do about this sitution.
My ford contour 1998 applies for back but it does not apply for the front already changes transmicion to him but siembargo I disconnect the selenoides applies to him for the front
I have no idea what you are saying here about your car. Do you need assistance with a problem? Please clarify
×
4,704 views
Usually answered in minutes!
yo will need to change the sensor on the tranny to make it go away
×