At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Defective diverter door! or foreign object blocking door,if it can switch to floor,vent,its 1 of the above problems,if it doesnt check mechanism for door.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if you have heat and nothing blows on defrost then this is a mode door problem that is not changing from floor to vent to defrost mode.it could be the mode switch or the mode door not working.the mode door is on the air duct under the dash and you can manually move it when you disconnect the control with your hand it should move freely.some of these have a small motor that moves the door.and if you move the switch in different modes or better have someone move the switch while you see were the door is the one that is moving is the mode door.if it won`t move on defrost tap the motor and see if it starts to work.if it does then it will have to be replaced if not it could be a switch problem.
The "air / heat " door is either run by vacuum or motor.
The "defalt setting" is always on either defrost or heat.
I would say you may have lost vacuum to the control, or the control may be bad or a vaccum line is off.
I had same problem . There is a vacuum resovoir tank located behind the left front splash shield . The vacuum line behind the battery goes to it . I removed two 5/32 screws just in front of the tire that hold the splash shield to the fender , carefully flex the shield away from the fender and take a look . I found the vacuum line had come loose , plugged it back on and everything works . Hope this helps
You have a vacuum leak.Defrost is the default postion(no vacuum).
See if you can locate the small black vacuum line that goes inside the vehicle on the passenger side near the heater core. The trace it back,should see it going to a canister then to the intake manifold.Make sure it is not disconnected or broken somewhere.
×