Heated seat problems

Heated Seat Components
The heated seat system consists of the following components:
• Driver and passenger heated seat switches
• Driver and passenger seat back heater elements
• Driver and passenger seat cushion heater elements
• Driver and passenger seat back temperature sensors
• Driver seat module
• Driver door module
• Passenger door module
When there are modules involved in the operation of any componet that's acting up , the module's electronic's could be the culprit ! But without testing who's to say what the problem could be !
I would have it check for DTC'S
DTC B2425 or B2430
The driver and passenger seat heaters are controlled by the driver seat module. Power is supplied to the driver seat cushion and back heater elements through individual voltage supply circuits. Power is supplied to the passenger seat cushion and back heater elements through a common voltage supply circuit. All of the driver and passenger seat heater elements are grounded by the driver seat module through individual low side drive control circuits. The heater element control circuits are pulse width modulated to ground by the driver seat module in order to control the seat temperatures by regulating the current flow through the heater elements.
DTC B2435 or B2440
The driver seat module relies on inputs from thermistors installed in the driver and passenger seat backs to control heated seat temperatures. The thermistors are 2-wire sensors supplied with a 5-volt referenced signal circuit and low reference circuit from the driver seat module. Resistance through the thermistors varies with temperature causing the heated seat sensor signal circuit voltage levels to decrease as the seat back temperatures rise.
Install a scan tool.
Start the engine.
Turn the heated seat ON.
With a scan tool, observe the Heated Seat Sensor parameter in the data list for the driver seat module.
Does the scan tool indicate that the heated seat sensor parameter is within the specified range?
0.078-4.94 V

Dodge Ram 3500 Questions - I have an 05 ... - CarGurus

www.cargurus.com > Questions > Dodge > Ram 3500

CarGurusAug 28, 2012 - I'm getting a code P2149 fuel injector group B supply volt... ... I'm getting a code P2149 fuel injector group B supply voltage circuit/open. ... 2005 dodge ram 1500 won't move when in gear 38 answers.

Question on codes p0202 and p2149 - Chevy and GMC Duramax Diesel Forum

www.duramaxforum.com > ... > 04.5-05 LLY Duramax Powertrain

Dec 5, 2009 - 6 posts - ‎4 authors
Hi got a 05 3500 running really ruff and throwing 2 codes p0202. ... Number #2 injector Drive fault, incorrect current on a fuel injector circuit (the ...

breaking down on freeway code p2149 - Chevy and GMC Duram

wiring harness ground faulty or engine ground strap possible

The speed o meter not working correctly is probably the result of a bad stepper motor inside the instrument cluster . GM had bad step motors from 2003 to 2006 . How to repair GM Instrument Cluster Speedometer Gauge Stepper .
The problem with the heated seat is more then likely bad heating elements . Testing the electrical circuit is the way to find the problem . CHEVY GMC SEAT HEATER TROUBLESHOOTING YouTube

you have a couple of problems first of all your drivers sd=ide heated heat pad is probably faulty, for your heating problem you may have to get the hvac doors recalibrated.

the main switch is wore out, Had the same problem the dealer install new switch 100 dollars for the part 125 for labor good luck

See GM TSB 05-08-143-001, If you have Adjustable pedals, especially if they don't work with the memeory buttons, but function with thier own buttons. Its the Brake Pedal Position Sensor is shorted and messing up the seat module which controls the heaters too. My 05 Suburban had the same issue. Can check by unplugging sensor and see if heated seats work .

See GM TSB 05-08-143-001, If you have Adjustable pedals, especially if they don't work with the memeory buttons, but function with thier own buttons. Its the Brake Pedal Position Sensor is shorted and mesing up the seat module which controls the heaters too. My 05 Suburban had the same issue

Have you Checked Both Fuse Boxes---Under the Dash and Under the Hood?

See GM TSB 05-08-143-001, If you have Adjustable pedals, especially if they don't work with the memeory buttons, but function with thier own buttons. Its the Brake Pedal Position Sensor is shorted and mesing up the seat module which controls the heaters too. My 05 Suburban had the same issue. Can check by unplugging switch and see if heated seats work .