SOURCE: timing for a 96 mercury mystique 2.0 4cyl. L4
You are quite right, there are no timing marks on the camshaft pulleys. One of the marks on the crankshaft pulley, the one that is furthest counter-clockwise, lines up with a raised mark on the oil pan,at about 5 O-Clock as viewed from the front. The special tool to position the camshafts is a straight bar that aligns the slots on the rear of the camshafts. These are supposed to be aligned before the belt is removed. If the engine is turned without the belt installed, some of the valves can be damaged. Hope this helps.
SOURCE: NEED TIMING MARKS 2.0L DUAL CAM FORD CONTOUR
the cam marks are on the cams under the valvecover the crank has a mark o nthe timing cover that you need to line it up to
SOURCE: how do i align the timing marks on a 1997 chevy cavalier 2.2l
on both timming gears there is 8mm holes that line up 2 the same size holes in the head, stick a 8mm bolt through to alighn cams, the crank marck pionts staight up. you might have the gears on the wrong cam.
SOURCE: timing marks for 2000 ford focus
Click on the following direct Link.
With the DOHC you will need the Camshaft Sprocket Holding Tool and Camshaft Alignment Tool.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2000/make/ford/model/focus/2000_ford_focus_timing_belt_diagram_marks.htm
SOURCE: need timing marks on dual cams for 2001 mazda
Click on the following direct Link. It has the Tining Belt Diagrams that will match your specific engine. Included are instructions and directions.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2001/make/mazda/model/protege/2001_mazda_protege_timing_belt_diagram_marks.htm
489 views
Usually answered in minutes!
×