SOURCE: location of crank position sensor on 92 chevy corsica 3.1
You will have a no start or stalls after engine gets hot and then cools down restarts, the sensor is on the front of the engine mounted into the cam gear cover if it is not visiable get under the, (here is a picture) car and look.
SOURCE: looking to findthe mass air flow sensor on a 89 chevy corsica
location is under the hood where the aircleaner is there is an electrical connection that plugs into the mass air flow sensor
SOURCE: ohms of resistance on a 1993 chevy corsica
i do not know but try these websites www.autozone.com and www.alldatadiy.com if all fails stop by your local library and get your hands on a Haynes auto repair manual you may also want to give you local auto part store a call wish you the best of luck Michigan Man.
SOURCE: 1995 chevy corsica knocking when starting and acceleration
IS it clicking or is it a tapping as a ticking/clicking/or a tapping are all differant problems (is it coming from the bottom of engine /top of engine/Front/or back).
If its sounds at the top it could be a valve tappet,/ if from front /Alternator bearings Water pump bearings etc,,But if from the bottom of engine then the noise could be Big End Bearings ,, so i must know a lot more information than what you gave me.
Let me know the answer to the problems A.S.A.P Ron
SOURCE: My 1995 chevy corsica is leakin ani and there's no
Chevy Corsica's have issues with cracking their engine blocks as well as having issues with their water pumps. Bring it into a shop and they can do a pressurized test on your coolant system, or let your vehicle heat up to to build pressure inside the cooling system and then inspect for leaks. The water pump is usually located near the lower side of the main drive shaft belt. It's typically the pulley that is attached to the motor and not other components such as the AC or Alternator.
321 views
Usually answered in minutes!
×