The battery is good, lights will come on and blade height will go up and down. I turn the key on but nothing happens. The red engine light comes on. I cleaned battery terminals and by passed the seat switch.
ZTRs require the following to allow engine crank/run.
PTO switch OFF
Brake ON
Both control arms out.
Some require operator in seat.
The Magnum has two fuses, some logic relays, and a seat delay.
Wiring diagram is available, free download, at the Dixie Chopper web site. See parts manual.
I have a 2012 Dixie chopper magnum 2760 engine running rough safety brake S/W wend in gage it will not start in neutral only wend brakes off I replaced all the S/W all 4 not key S/W replace plugs fuel filter?could it be the wiring connector wiring ? Broken wire
Check or by pass the parking brake sw. it is on the same circuit.
3,356 views
Usually answered in minutes!
×