Question about Seat Cars & Trucks
The back seat of the Impala can only be folded down if your vehicle is the particular fold-down version, otherwise, it'll have to be removed entirely to gain access to the massive available space.
To remove the seat, follow these steps:
• Push down on the bottom cushion of the back seat.
• Pull-on the T handles which are under the front edge of the seat, to release the bottom cushion
• Remove the cushion
• Unwind the nuts and bolts on the bottom part of the back seat. Then lift it, and it would be released from its position.
• Now, remove the seat from the back and you can access the trunk.
Posted on May 19, 2020
you have a fuse for it ,check the fuse box ,it might not say trunk on fuse panel, you might need to pull those fuses out one by one checking each one to see if blown, if the center between the two sides are broke the fuse is blown, hope this helps you, thanks robert b.
Posted on Jun 28, 2009
Open the back trunk, look near the top of the trunk, and pull the two black levers. They have a seat folding down symbol. That will release the locks to fold the back seat down.
Posted on Jul 04, 2009
the release for each part of the back seat is in the trunk, just behind the split in the seat. pull till you hear it release (clunk).
Posted on Aug 13, 2009
I have had this problem, and I am having it again. The problem is if a little trash gets under the bar in the floor, it will keep the mechanism from locking completely. I had tried everything. The only solution so far is the rock back and forth. Real pain. I am trying to find a secret release.
Posted on Sep 07, 2009
In the trunk on the top there are two straps that look like they go on a back pack, just behind the split in the seat. You need to pull those down and it undoes a latch on the back of the seats, which then you can fold them down. Good luck and enjoy your Cavalier.
Posted on Dec 15, 2009
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: