I have a 2002 Eclipse. The clock is working normally but the mode button stopped working therefore I can not set it to the correct time. What will it take to fix this problem??

Turn [SEL] button to select CLOCK ADJ.

Press the [SEL] button. The clock adjustment mode is activated. Turn [SEL] button to display the item to be selected for adjustment. Hours, minutes or exact hour will be switched each time the button is turned.

Press the [SEEK /FAST ] button. [SEEK ] button: Turns the time forward. [FAST ] button: Turns the time back. To set the clock to 0 minutes, 0 seconds (an exact hour), press the [SEEK /FAST ] button.

For example: At 3:29: Pressing the [SEEK /FAST ] button returns to 3:00. At 3:30: Pressing the [SEEK /FAST ] button advances to 4:00.

Press the [RTN] button. At this time, other adjustments can also be made in Function Mode. 6 Press the [FUNC] button to exit Function Mode.

Also, you can read the manual here:
http://www.eclipse-web.com/us/download/manual/manual/pdf/CD3414(1-1455A).pdf

1: press and hold the MODE button until TA VOLUME is displayed. 2: Press and release the Mode button until CLOCK SET is displayed.
3: While the display is flashing use the SEEK UP/SEEK DOWN keys to select 12hr or 24hr style display
4: Press and release the MODE button again If 12hr format has been selected use the # key to select AM or PM Using the Numeric Keypad enter the correct time using four digits i.e 1045 for 10:45. Press and hold the MODE button to return to the normal audio mode.
http://electronicshelponline.blogspot.com/

DL the opertators guide.
its free for allcars.
google it. " 2002 GMC Sierra 1500 operators guide"
that trick works for all cars made,no need to guess.
if your is lost. RTM

Press and hold the MODE button until TA VOLUME is displayed
Repeatedly press MODE button until CLOCK SET is displayed
Seek up/ seek down keys select 12 or 24 hr mode
Press MODE Button
If 12 hr mode is selected use # button to selected Am or PM
Use keypad to enter time .... four digits
Press and hold MODE key to exit
Hope this helps!

Turn the igniton to the "on" position. The radio should have two small buttons on it marked H (for hours) and M (for minutes). Press and hold the H button for a few seconds and the clock will go into a "set" mode. adjust the hours until the time is correct and then let go of the button and you will be all set.

Usually on older AC-Delco/Remy Radio, press the "set" button and it will take you back to the radio station frequency, then push the left knob inward, then it will take you back to the time again. Before the "set" mode ceases, use the seek and scan buttons to change the minute and hour for the time, until you get to the time you want.


Other models will have the "set" button being a small almost hidden button, you can use a paper clip pin end to depress. Which will initiate the "set" mode, then you can push in the left or right knobs and the time mode will come on. Then using seek rocker switch or the seek and scan buttons the time minutes and hours will start to change.


The last type is where you have to either hold down the set button then use the seek and scan buttons or you have to hold down the set button for about 4 seconds then the clock will go into a blinking or set display mode, for which you can use either the knobs or the seek and scan buttons to produce minute and hour change display on your clock.



Try these methods. I know on older GM vehicles with AC Delco/Remy type radios/stereos, usually there is a "set" button for setting your favorite radio stations to instant numbered buttons, usually up to four or five of them. This same "set" button can be used to set the time. But when you hit the "set" button it will take you to the radio station frequency, not the time. That is when you press in the left knob or sometimes the right knob, and the time display will come on, while it is still in the set mode. Then you can press on the seek and scan buttons, one of them will change your minutes the other one will change your hours, for your clock display time. When you reach the correct time you desire, then hit the "set" button again, which will turn off the set mode. Your clock should start working normally, starting from the time you've set

There are three buttons, let's call them 1, 2, and 3, from left to right.


Clock
Time setting

A. 12 AM, PM or 24.00 h
With the clock in the time readout mode, keep
button (2) depressed for 4 seconds -12 AM, PM
or 24.00 flashing. After pushing button (1), either
a 12-hour (AM + PM) or a 24-hour setting
program can be selected. If you only want to
change the display mode, push button (3). The
clock then returns to its normal timekeeping
function.

B. Hours
Push button (2) a second time - hour display
flashes. Set hour by pushing button (1). After
pushing button (3)*, the clock returns to the time
readout mode with new hour setting.

C. Minutes
Push button (2) once more - minute display
flashes. Set minute by pushing button (1). Upon
pushing button (3)*, the clock is started -
accurate to within 1 second.

Stop watch function
The stop watch can only be set in motion if the
clock is in its normal timekeeping mode and not
during setting operations.
A. Push button (3) - 00:00 display appears;
B. Push button (1) - stop watch is on;
C. Push button (1) a second time - watch stops.
(Additional times can be added by pushing button
(1) again - stop watch keeps running. Push button
(1) once more to stop timing.)
D. Push button (2) - 00:00 display appears;
E. Push button (3) - normal timekeeping mode.

If button (3) is pushed during operation A and
B, the setting procedure must be restarted
(push button (2)).

if it is anythang like the 2002 eclipse gt stereo there is 2 button on the right side of the display screen hold the right one down and it will change the mins and the other 1 will change the hours

Setting the Clock for Systems with the
Set Button
Press SET. Within five seconds, press and hold the right
SEEK arrow until the correct minute appears on the
display. Press and hold the left SEEK arrow until the
correct hour appears on the display.
Setting the Clock for Systems with HR
and MN Buttons
Press and hold HR until the correct hour appears on the
display. Press and hold MN until the correct minute
appears on the display. To display the clock with the
ignition off, press RECALL or HR/MN and the time
will be displayed for a few seconds. There is an initial
two-second delay before the clock goes into the
time-set mode

Actully, you need to press and HOLD the "mode" button for a few seconds. It will then display the setting for the speed sensative volume. Press the mode button agian and it will switch to "set clock". You can select a 12 hour (standard) or 24 hour (military) clock. You then use the key pad to enter the time and the AM or PM setting .