How do I install a ignition coil on a 1998 Pontaic Grand AM 2.4L 4CYL DOHC

IGNITION TIMING

1998 Pontiac Grand Am 2.4L SFI DOHC 4cyl

The Ignition Timing

Computer operated - electronically controlled (refer to decal)

they are the coil packs

Removal & Installation To Remove:

1. Remove the air cleaner outlet pipe if interfering.
2. Disconnect the connector from the ignition coil.
   
   
3. Remove the bolt from the ignition coil.
   
   
4. Remove the ignition coil on plug.

To Install:

1. Install ignition coil on spark plug.
2. Install ignition coil bolt. Tighten to 10 Nm (89 in. lbs.).
   
   
3. Reconnect the ignition coil electrical connector.
   
   
4. Install the air cleaner outlet pipe if removed earlier.

I have 99 pontiac grand am and is misfiring the is code p0300 I have already changed the spark plugs and the two coils including the ignition coil cover. The car shacks when you turn it on and it smells like gas from the muffler. Also after a while the cadillac converter turns red from it heating up. Can some help me out?

For the 1998 VW Jetta:
I do not know if you have the 2.0L SOHC In-Line 4-Cylinder or the 2.8L DOHC V-6; however I have included both below. The 2.0L has a ture Distributor Cap and the 2.8L has an Ignition Coil.

For the 2.0L SOHC In-Line 4-Cylinder:
Firing Order:
1-3-4-2
Cylinders
........(back).........
|...1...2...3...4...|
.......(front)
Distributor:
..(back)
(+)..1
2..........3
......4....(+)-screw

For the 2.8L DOHC V-6:
Firing Order:
1-5-3-6-2-4
Cylinders:
.......(back).......
|.1....3....5....|
|....2....4....6.|
Ignition Coil Connections
(back)
|.2..5.|
|.4..3.|
|.6..1.|
(front)

Let me know if this helped, or if you have additional information of questions. Feel Free to contact me at FixYa.com!

1998 Mercury Mystique 2.0L MFI DOHC 4cyl



align the camshafts and the...



Fig. 5: Alignment marks for timing chain installation-left hand side



Fig. 6: Alignment marks for timing chain installation-right hand side

Hope thats help.

1999 Kia Truck Sportage 4WD 2.0L MFI DOHC 4cyl



Fig. 2.0L Engine Firing order: 1-3-4-2 Distributorless ignition system (one coil on each cylinder)

Hope helps with this (remember rated this help). Gooc luck.

For the 1996 Pontiac Grand Prix:
I do not know if you have the 3.1L V6 or the 3.4L DOHC V6; however I have included both below...

For the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
......(back).......
|...1....3....5...|
____________
|...2....4....6...|
.......(front)
Ignition Coil Connections:
.|.5..2.|..|.3..6.|..|.4..1.|


For the 3.4L DOHC V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
.....(back).......
|...1....3....5...|
____________
|...2....4....6...|
......(front)
Ignition Coil Connections:
(back)
o <---4
o <---1
___
o <---6
o <---3
___
o <---2
o <---5
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

2002 Pontiac Grand Am 2.2L MFI DOHC 4cyl

The spark plugs on this engine are located under the ignition coil and module assembly. To gain access to the spark plugs, the coil and module assembly must be removed. On the 2.4L (VIN T) engines, the spark plugs are platinum and require replacement every 100,000 miles (160,900 km) or 60 months which ever comes first.



Fig. To remove the cover, unfasten the four bolts, then pull the assembly straight up from the engine

More details in autozone.com (free register).

Hope helped. Remember rated this help. Good luck.

Its 2 screws in the middle below the temp controls and 2 just above the speedometer.