How can I install "this" product? - 2005 Ford F 250 Super Duty

What is the product you wish to fit

No, OnStar is a GM only product. OnStar is a factory-installed option and cannot be installed by a dealer or retailer, so you must do one of the following: 1) Purchase a GM vehicle with OnStar 2) Own a GM vehicle with OnStar. Acura contracted with GM for a few years, OnStar was in the RL. I never heard of this in any other Honda products. ...
CONTINUE READING No, OnStar is a GM only product.

OnStar is a factory-installed option and cannot be installed by a dealer or retailer, so you must do one of the following:

1) Purchase a GM vehicle with OnStar
2) Own a GM vehicle with OnStar No, OnStar is a GM only product. <br /><br /> OnStar is a factory-installed option and cannot be installed by a dealer or retailer, so you must do one of the following: <br /><br /> 1) Purchase a GM vehicle with OnStar <br /> 2) Own a GM vehicle with OnStar Minor edit? Save Cancel 4 people

You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to Factory Installed Systems not add on aftermarket systems.
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to Factory Installed Systems not add on aftermarket systems.
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to factory installed systems not add on aftermarket systems.
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to factory installed systems not add on aftermarket systems.
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
This is for car and truck problems related to factory systems .
This post can't be removed or moved, please re-post the question in the correct product category. Thanks

Rear Combination Light- 2007 might vary from these diagrams:
Removal & Installation 2004 (Early Production) 4 Door To Remove:

1. Disconnect battery negative cable.
2. Disconnect electrical connector. Rear Combination Light
   
   
3. Remove 2 screws and 2 nuts and remove light assembly.

To Install:

1. Install light assembly and 2 screws and 2 nuts.
2. Connect electrical connector.
3. Connect battery negative cable.

5 Door To Remove:

1. Disconnect battery negative cable.
2. Disconnect electrical connector. Rear combination light
   
   
3. Remove 2 screws and push light assembly toward outside of vehicle. CAUTION
   Use care to not damage gasket.
   
4. Pull rear combination light from vehicle.

To Install:

1. Install rear combination light and 2 screws.
2. Install 2 screws.
3. Connect electrical connector.
4. Connect battery negative cable.

2004 (Late Production), 2005-2009 To Remove:
Turn Signal Lamp

1. Disconnect battery negative cable.
2. Remove 2 screws and cover inside trunk.
3. Remove 4 nuts and disconnect electrical connector (A).
4. Remove rear combination lamp.

To Install:
Turn Signal Lamp

1. Install rear combination lamp.
2. Install 4 nuts and connect electrical connector (A).
3. Install cover inside trunk and install 2 screws.
4. Connect battery negative cable.

its better to return back this product as official websites doesn't have anby demo. There is no customer care available this product. This is scrapp product.

you can just install with window xp but take data backup in another drive