Where can i fine codes for radio changed the battery now it will not work and if you have the code were do you put it in

For radio codes emailed to you try here: Car radio codes United Kingdom Gumtree

Being a Brit I don,t know the car but would suggest that your radio/CD might be security coded which works as a security device if someone steals it. There should be instructions somewhere in your glovebox manual telling you how to re-code it. The code would be supplied with the radio and noted somewhere. If not the Pontiac dealer may be able to help you if you quote him your VIN. Some "mechanics" foolishly write the code on the radio unit label - it's stupid but you could try there first!

the hold means you must put in the anti-theft code on the radio. To do that you must pull radio ,write down serial number of radio take that number to kia dealer, they can look it up and give you the code to get the radio working again.

You need the security code to reactivate it. If you havent got that hten try your local dealership. If still no go the stereo is useless....its an ant-theft device. If a garage changed the battery I would put it to them to fix / replace. If you did it then you are basically in for replacement stereo!!!

check the wirings of your speakers and then check the settings on your radio.

I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482

You have to put the battery on a charger and leave the key turned to the accessory position, meaning the car is not running but the radio still displays off. You will have to wait approximately 50 minutes to 2 hours till the word "code" is displayed.Once that has occured, you can put in your code and it will work. Or you can drive around for that length of time until it says code and you will input the correct code and you radio will work. I did this on a long trip.

In the owners manual booklet there should be a radio code that you have to punch in in order for the radio to work. This is in case your radio gets stolen no one else can use it. When you change the battery or the battery goes dead you have to put this code in for the radio to work again. The radio code may be on a card inside the leather case the owners manual comes in.. This is where mine was.

disconnect (1 post only negative-) battery and put right code in after reconnecting . the two issues are not connected- oh tightenen cables-sounds like they are loose