SOURCE: 89 Ford Ranger Carrier bearing
All the bearings for the rear diff are pressed off and on, they can be done at home if u have a high quality bearing puller, but to press them on should be done at the machine shop.
SOURCE: will '89 Ranger leaf springs fit a '99 Ford Ranger 4x4?
Measure the distance from bolt to bolt, and to the center. If they match then, they match, if not you will have to check the numbers with fords tolerances to avoid an axle wrap. But it should fit, maybe just a little stiffer of a suspension from the 4x4.
Calvin the Mobile Mechanic.
SOURCE: I have an 89 ford ranger 2.9 engine. The engine
Have the fuel pressure checked,and replace the fuel filter first,it is most likely one of the two causing the problem,if this was helpful,please rate,thank you.
SOURCE: transmission install 89 ford ranger
You should be able to rent a spline alignment tool from the parts house where you got transmission. I'm assuming you have a manual transmission so the clutch pad doesn't want to cooperate? I think even with an automatic it's much the same.
217 views
Usually answered in minutes!
×