<!-- from fixya rte -->How to enter radio code for peogeot 206 03 - 206 Peugeot Cars & Trucks

that fault code is too high for a Peugeot 206 with OBD2

i checked all the Peugeot car forum sites for answers
on that code

P14660 no mention
PO4660 no mention
PO1466 no mention

need to start back old school diagnosis

fuel pump ... spark at plugs

this is the world list of all PO obd2 fault codes
http://www.troublecodes.net/pcodes

Have you checked the vacuum pipe from the distributor to the carburetor, its the automatic advance, if this is leaking then that will cause a sudden failure when extra gas is applied .

You need to have a OBDCII code reader to plug into the standard plug at the lower edge of your dashboard and it should give you a code which will tell you what one or multiple things are likely causing your problem.

may be locked up..these get spun by exhaust gasses coming out of the manifold..if it does not spin..its locked up and needs replaced..may find one at a salvage yard..new ones arent cheap...

follow coolant hoses to cylinder block thermostat in the housing.

ive got a 206 peogeot 2002 the radio displays 8 error can anyone help me on this?

any citroen/peogeot dealer (they are the same company)will be able to supply, on exchange, the injectors.if you are in Europe its easy, outside Eurpoe its best to email a dealer with the chassis no,so they can ship them to you.you may find them cheaper than buying them from a U.S.dealer.

I found a drawing that may help you. Let me know if it does.

The website is: http://www.autodata.ru/efisakh/melochi_9.htm

Scroll down to the bottom of the page and it has your Peogeot belt drawing.

Hope this helps

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
2. The code number for the radio is advised to you on the enclosed CODE CARD.
3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.

AR82.60-P-7502-01B Coding Radio
(MODEL all with CODE (353) Audio 30 APS with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker) with CODE (512a) Radio MB Special with traffic news decoder, with RDS.)

1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
2. The code number for the radio is given on the enclosed CODE CARD.
3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.