The car starts and runs but none of the dash info works and windows wont go up and lights and blinkers dont work
SOURCE: 1995 mitsubishi pajero glow plugs
When you turn on the key, a relay engages for a few seconds and heats up the glow plugs. It sounds like the relay is not passing current, which could indicate either corroded contacts, or a bad relay all together. I would guess the former since your panel light indicates the relay is functioning correctly. I would suggest replacing the relay, or possibly if you feel comfortable with it, disassemble the relay and clean the contacts.
SOURCE: My blinkers wont work but the hazards work. No fuses burnt out.
That would most likely be the switch itself. Fairly common
SOURCE: radio controls and lcd on dash not working unless lights on
The front radio control bezel has failed and needs to be replaced. You can unplug the ETACs ecu and plug it back in and it will wake the panel up, but it will only last a few hours before it happens again.
This is an emerging problem on 08+ Lancers and 07+ Outlanders
SOURCE: I have a 2001 Eclipse,car will not start.
Most likely a ignition / ignition switch problem
Testimonial: "I thought that as well,Thanks."
80 views
Usually answered in minutes!
×