2008 Ford Focus SE Sedan Logo

Related Topics:

A
Anonymous Posted on Jul 05, 2014

How do i change the reverse light fuse on a ford focus 2008 zetec

Reverse light fuse

5 Related Answers

Anonymous

  • 5 Answers
  • Posted on Oct 21, 2008

SOURCE: Replace driver side fog light Zetec model

remove under panels and fit ure new one

Ad

Anonymous

  • 437 Answers
  • Posted on May 31, 2009

SOURCE: after how many miles should the timing belt be changed

According to Ford the scheduled replacement is 120K

blubanshee

Corey Malone

  • 48 Answers
  • Posted on Jun 14, 2009

SOURCE: is it hard to change an alternator on a ford focus

Hello, This job is alot harder on your car than most that's for sure. It really depends on your mechanical ability and time vs the amount your willing to pay someone else. This job is easy if your not afraid to loosen the passenger motor mount and slid the engine forward about an inch with a pry bar. (Which sounds alot harder than it is) But the Hanes manual lists alot of things to do to get around the motor mount.

Per Haynes Manual.
Place Coolant Expansion Tank to one side.
Lift out Power Steering Reservoir and put to one side.
Remove DriveBelt.
Unscrew Wiring Loom bolt and move wiring to one side.
Remove Ground Cable from Strut Tower.
Bent the ground bracket down as much as possible.
Move Canister Purge Valve to one side.
Remove Plastic Cover from Alternator.
Unscrew and the alternator mounting bolt nearest the engine first.
Unscrew the other retaining bolt until it has fully disengaged from the bracket (not possible to remove bolt from alternator at this stage).
Lift the alternator out, Pulley side facing upwards.
Take care not to damage or you might screw your surrounding components!

I would say if you dont work on cars or have mechanical ability you should prob take it to a profesional. I hope my answer helped more than it scared you....lol....Have a great weekend and please rate my answer if you felt it was helpful

Anonymous

  • 5 Answers
  • Posted on Jun 14, 2009

SOURCE: 2003 ford focus zetec ABS light flashes on intermittently

an interminnent flash of the ABS light generally indicates a fault in the ABS system. It will flashing a code to you. Causes for this kind of problem are usually a sensor or air bag resistance out of range - too much, or not enough resistance. You might be able to find out on line what the code means. To read the code, they are generally groups of flashes. watch it carefully, there should be a big pause at some stage, that is the end of it's cycle. Now watch and count the flashes, for example- . . . - . . . . - . . - would be the code 342. If you have no luck finding the codes online i recommend calling your local ford dealership

Anonymous

  • 1986 Answers
  • Posted on Sep 04, 2009

SOURCE: how do i change the fog light on a 2001 ford focus

lie on your back or jack the car up and reach up behind the bumper and pull the harness off the back of the bulb. twist the bulb counter clock wise and pull it out....

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i change the headlight blub on my ford focus Zetec 2008 model

if i remember correctly you have to remove the headlight to replace the bulbs


let me know if this helps mate


cheers
mike
2helpful
1answer

57 plate, Ford Focus Zetec, 1.8 diesal. ABS warning light,Steering Failure Assist light and Battery light on again. Alternator replaced 9 days ago, and been sluggish,heavy steering since and now won't...

2009 Ford Focus Zetec, 1.8 diesal. ABS warning light,Steering Failure Assist light and Battery light all on. Can't steer car. Then takes twenty minutes to restart car. Any ideas?
1helpful
1answer
1helpful
1answer

How do you change the belt and get the adjuster pully to move, and my dome and mapp lights just stopped working but the fuse is still good

not sure which engine you have or if European Focus. Here's what I have

Accessory Drive Belt —2.0L Zetec-E Removal
  1. Raise and support the vehicle. For additional information, refer to Section 100-02 .
  1. Remove the splash shield.
  1. NOTE: For vehicles with 1.4L and 1.6L engines and equipped with air conditioning the tensioner rotates in a counterclockwise direction.
    Remove the accessory drive belt.
    1. Rotate the tensioner clockwise.
    1. Remove the belt.
Installation
  1. To install, reverse the removal procedure.
1f6dac4.gif
0helpful
1answer
0helpful
1answer

Gearbox wont stay in reverse

strip and repair job is only soloution the selector is worn or the gear its self is cream crackered
0helpful
1answer

Instrument panel lighting

look for the control,its their somewhere
Not finding what you are looking for?

498 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...