SOURCE: 2001 Infiniti QX4 low beam bulb replacement instructions
Look directly behind the headlight box if there is a rubber sleave covering the plug take it off. Unplug the wires from the bulb, there may be a saftey clip you will have to pry up to get it off.after you get the plug off the bulb holder should twist counterclockwise then it will pull right off.When you change the bulb just remember to wipe your body oil off the bulb before attaching it back into the headlight box. Then plug it back in and your in business. The high beam has three wires and the low beam has two wires. The bulb will have to be the right one.
God Bless You Greg
SOURCE: how many catalitic converters are on the 2001 infiniti QX4
There are only to Catalysts monitored by the ECM. There is a wide pipe near the front of the exhaust system that looks like it houses a catalyst, but it doesn't. Look for the rear O2 sensor, that is where the catalyst is. If the bolts that hold it on are not badly rusted, and depending on your mechanical aptitude you could replace them, otherwise take it to a shop. Have you checked the warranty coverage with the dealership?
SOURCE: 1999 Infinity QX4. Door Open warning light
usually on post where door closes, or in jamb by hinge area. Open door & try pushing any button/pin like object or may be a lever style too, with thumb or finger.When interior light goes out, you found it
SOURCE: 1998 infiniti qx4
shift solonoid b is in the transmission. not a do it
yourself situation. clear the codes and drive , see
if it comes back before you take it in for repair.
also check wiring going to trans. look for broken
wires and wires that are rubbed through
SOURCE: tryen to find location of the crank sensor on 1998 infiniti QX4
looking for crankshaft sensor on 1998 infiniti qx4
70 views
Usually answered in minutes!
×