Cars & Trucks Logo

Related Topics:

Posted on Jan 20, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How to replace a fuel pump on1999 infiniti qx4

  • 2 more comments 
  • martywright Jan 20, 2011

    instructions from first advice were very vague,could you be more desriptive?

  • martywright Jan 21, 2011

    Is it possible that my problem is a cloged fuel filter and not a bad fuel pump? I am going to do the job sunday.

  • martywright Jan 23, 2011

    Iam in yhe middle of the job. something seams to be holding the pump i cant pull it up!!

  • martywright Jan 23, 2011

    We have replaced fuel pump amd filter. still will not start. we are getting spark, so what next? any ideas.

×

4 Answers

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Expert 112 Answers
  • Posted on Jan 20, 2011
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Jan 01, 2011
Answers
112
Questions
0
Helped
70641
Points
402

  1. If this helps please leave positive feedback and vote. Good Luck
  2. You got lucky as you do not have to drop the fuel tank to perform this job.
  3. There is an access panel right rear of the back seat...
  4. Release fuel pressure from fuel line.
  5. Remove inspection hole cover located behind the rear seat.
  6. Disconnect harness connectors and fuel tubes from upper plate of fuel gauge.
  7. Put mating marks on tubes for correct installation.
  8. Remove fuel gauge retainer and fuel gauge.
  9. Remove fuel pump with bracket while lifting the paw of the fuel pump bracket upward.
  10. Installation procedure is the reverse order of removal.
  11. how to replace a fuel - edwardafzal_4.gif

Jose Cada

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 3,530 Answers
  • Posted on Jan 24, 2011
Jose Cada
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Mar 25, 2010
Answers
3530
Questions
2
Helped
965311
Points
9839

Welcome to Fixya

The fuel pump is inside the gas tank. The access opening to the gas tank is located under the rear seat on the driver side.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Ad

Duane Wong

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Infiniti Master 6,826 Answers
  • Posted on Jan 21, 2011
Duane Wong
Infiniti Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jun 20, 2010
Answers
6826
Questions
6
Helped
2861405
Points
20234

Fuel Pump & Fuel Level Sensor Unit Removal & Installation To Remove:

  1. Relieve the fuel system pressure.
  2. Remove the fuel filler cap to release pressure in the tank.
  3. Remove the service hole cover located under the rear seat.
  4. Disconnect the electrical connectors and fuel lines from the fuel level sensor unit. Mark the tubes so they will be installed in their original locations.
  5. Remove the screws and retainer.
  6. Carefully lift the fuel level sensor unit from the tank. CAUTION
    Do not bend the float arm during removal.
  7. Disconnect the fuel lines from the bottom of the fuel level sensor unit.
  8. Reach inside the tank, lift the pawl and remove the fuel pump from the tank.
Exploded view of fuel pump and fuel level sensor how to replace a fuel - nissan-05-00-5459.gif

Fuel pump removal

To Install:
  1. Install the fuel pump in the tank.
  2. Place a new o-ring on the fuel tank.
  3. Connect the fuel lines to the bottom of the fuel level sensor unit.
  4. Install the retainer and screws to secure the fuel level sensor unit.
  5. Connect the fuel lines and the electrical connectors to the fuel level sensor unit.
  6. Turn the ignition to ON and check for leaks.
  7. Start the engine and check for leaks.
  8. Install the service hole cover and rear seat.
next.gif

Charles T Nevin

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 4,070 Answers
  • Posted on Jan 20, 2011
Charles T Nevin
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jun 30, 2009
Answers
4070
Questions
0
Helped
1087905
Points
13055

Here's the INSTRUCTIONS. The access panel is in the floor.

  • Charles T Nevin
    Charles T Nevin Jan 21, 2011

    If the filter is stopped up enough to restrict fuel flow the pump is usually damaged and wont pump enough even with a new filter. When you change the filter, blow through it and compare it to the new one and of course do the filter and then see if the engine will start before replacing the pump.

  • Charles T Nevin
    Charles T Nevin Jan 23, 2011

    Do you think the gasket or seal is sticking and not letting it come out. If it's coming up some but something is catching it try turning and tilting it. But be gentle so you don't brake anything.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is the water pump located on a 2001 Infiniti QX4


DIY Video: VQ35DE Timing Chain Tensioner and Water Pump Replacement - YouTube

Nissan 3.5L timing chain update - YouTube

Timing Chain Kit Water Pump Fit 01-04 Infiniti QX4 Nissan Pathfinder 3.5 VQ35DE ' eBay

2002 QX4 overheating trouble - Nissan Forum ' Nissan Forums (nicoclub.com)

2002 infiniti q45 water pump replacement - YouTube

2001-2004 Pathfinder Infiniti QX4 both thermostats replaced - YouTube

It looks like your water pump on a 3.5L is run off the timing chain. I got some info which may help see it but may not be the exact as your car. If you are having some problems with overheating from what I saw looks like you have 2 thermostats and after changing thermostats, you can have air trapped in your engine, which will still allow engine to overheat.




0helpful
1answer

1999 infiniti qx4 stumbles and miss fires as soon as temperature gauge mones

Make sure your temperature sensor for the ECU is operating properly. The computer might be staying in phase lock loop (choke for fuel injected engines) and causing it to run too rich.
0helpful
1answer

Where is the fuel pump located

The fuel pump is located in the fuel tank. Access is through a panel behind the rear seat.
0helpful
1answer

99 infinity qx4 where is the fuel **** located

The fuel pump is located inside the fuel tank and is accessed through an access cover behind the rear seat.
0helpful
1answer

Infiniti qx4 problems

have the fault codes read to determine the faulty sensor.
0helpful
1answer

Fuel shut off switch location

The fuel pump shut off switch ( inertia switch ) is in the drivers footwell behind the kick panel. The panel is probably held on with clips and will pop off with a light tug.
0helpful
1answer

Fuel system on infiniti 1999

Turn key forward and listen for the fuel pump to kick on. It will make a high pitched sound then shut off. If no sound the more than likely you need a fuel pump. You can check at the fuel rail with a guage pressure should be 30psi.
Not finding what you are looking for?

4,040 views

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...