Lost my key to my 2006 Chevy Uplander, dealer cut one to my vin, it went in lights came on but would not turn. Why did this happen and what should I do?
It is possible that the key that he cut is a fraction out of align with the tumbler pins and that is registered as a wrong key combination. Have him check length of the key from the last tumbler to the pin . or take the key to a locksmith and see it anything can be explained as to why it will not turn
SOURCE: 2001 chevy venture lost key
You must get a new key from the dealer. Bring in the registration, and photo I.D. Then they will cut you a key. After that, try this procedure....
GM technicians on-line
SOURCE: Chevy uplander Brakes
check advanced auto they can get you a haynes book or they may have one in stock
SOURCE: 2006 chevy uplander inst. cluster lights
Check on ebay, I had the same prob with mine, 3 lights blew out. Check 12v_electronics, NEW MERCEDES VW BMW DASH INSTRUMENT CLUSTER BULBS 1.5W. This is where i bought mine and have not had any prob. No dealer or parts house will carry this bulb seperate.
SOURCE: I want to replace the left rear turn signal bulb
Open your lift gate and you will notice the lamps are incased in a black plastic housing. There are 3 star screws you need to remove in order to pull out the housing and change the bulb. You may need to buy a a special screwdriver or bit for one.
SOURCE: the sliding door on 2006 chevy uplander will not
Remove the rubber seal at the bottom of the door. It is ONLY there for aesthetic purposes (I asked the dealership). They said that is common and this is what they do to fix the problem.
811 views
Usually answered in minutes!
×