2000 Kia Sportage Logo
Posted on May 12, 2009

Does anyone have a helpful diagram or explanation where the coil packs are located on a 2000 kia sportage?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 23 Answers
  • Posted on May 12, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: May 25, 2008
Answers
23
Questions
3
Helped
7380
Points
37

Hi there!It sounds like you may have a problem with the idle speed control actualtor.This unit adjusts air to air fuel mixture.Sometimes it can get covered with carbon and not work correctly.Try taking it off and cleaning it good with some carb cleaner.Then reinstall it and see if the performance is any better.If it is then you should replace it.Here is some info,hope it helps!Thanks It is the intake air control valve in the diagram below.
The idle speed control actuator maintains idle speed according to various engine loads and conditions. This component also provides additional air during startup. It consists of an opening coil, a closing coil and a permanent magnet. According to the control signals from the ECM, the valve rotor rotates to control the bypass air flow into the engine.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Diagram of coil pack firing order on 2006 kia sportage

Firing order is 1-2-3-4-5-6
Cylinders on the head with the coil pack are 2-4-6 so the other head is 1-3-5
Its difficult to tell by the diagram but the coil sequence may be 3-4-5-2-6-1
diagram courtesy of autozone.com



25848486-y5zvmpub1gzt0i2h042pkgky-2-0.gif
0helpful
1answer

Is there a wiring diagram available for ignition system

http://documentbuzz.com/wiring-diagram/1997-kia-sportage-system-wiring-diagram-download/ try this site.
0helpful
1answer

I was doing some maintenance on my daughters car and realized the belt to the AC pump was missing. How do I replace it?

The coil packs are located with the sparks plugs, Two are regular plugs & two have the coil packs.
1helpful
1answer

How many coil packs does my 1999 kia sportage glx se have

There are two ignition coils, each coil fires 2 cylinders, one cylinder is directly fired, the other has a plug wire from the same coil. This is like a 4 cylinder motorcycle ignition. See picture below.
emissionwiz_143.jpg
0helpful
1answer

Cylinder head gasket has to be changed :(

Sell the car as is, $2000 ish job and at the end of the day its still a kia, still will have faulty coil packs and air flow meters and crank sensors. I have had many problems with kia sportages. good luck
5helpful
3answers

2000 Sportage: where is the spark plugs located on a 2000 Kia Sp...

They are under the black plastic cover that is in the middle of your valve cover gasket. Remove the intake hose from the aluminum intake plenum on top of the valve cover and the silencer box against the firewall. Remove all the connectors from the sensors which should be 2 on the plenum and the 2 large vacuum hoses on the plenum. Then remove the 3 12mm bolts from the plenum at the throttle body and remove the plenum. You can reuse the throttle body gasket at the plenum so don't destroy it. All the other bolts are 10mm and use a screwdriver to loosen the clamps on the hose. The sensors have clips that you need to remove with a small screwdriver, then disconnect them. Remove the bolts on the cover and the cover. Then remove the bolts holding the coil packs down. Do one plug at a time. 2 of them are connected to the 2 plug wires and 2 are underneath the 2 coil packs. The connectors on the coil packs are fragile so remove them carefully. Reverse the steps to reinstall the plenum, etc.
1helpful
1answer

What order do the spark plug wires go in on a 2000 kia sportage?

Basically the coil pack in the rear of the engine feeds cylinder #4 and there is a a plug wire off of that coil pack also that feeds cylinder #1. The coil that sits toward the front of the engine feeds cylinder #2 and the plug wire coming off that coil pack feeds cylinder #3. Each coil pack has a white plastic connector that can fit either coil but the length of the wires to each coil is different and should be easy to distinguish which coil pack each connects to. -cylinder #1 would be at the front of the engine and cylinder #4 would be at the rear.
0helpful
1answer

Where is the coil pack located

The coil pack is located on the right side of the engine (look from the front) under the plastic manifold covers. Just follow the pretty spark plug wires to the end and they attach to the coil pack.
Rate it....
1helpful
2answers

2000 kia sportage putting and stalling

fuel filter is down between battery and motor . check coil packs
Not finding what you are looking for?

916 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...