20 Most Recent 2006 Kia Sportage Questions & Answers

Question edited for clarity and toss in some CAPS. Question moved to model category. The most likely reason for this is not the actuator, but broken wires in the harness where all the door wires go from the door edge to the door jamb. The constant opening and closing of the driver door causes them to 'work harden' and snap. It is an easy fix for an auto electrician. They expose the wires and probe them for continuity. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

Make sure the shifter cable is correctly adjusted. https://www.kiaownersclub.co.uk/threads/kia-sportage-auto-gear-shift.54702/ This forum may help you.

I need tore place my out here outer door handle on drivers side as well I already replaced the drivers handle but the back handle seems to be a bit harder to get to does anyone have a simpler way because this is frustrating I can't get a socket or a wrench in the door to remove the bolt... Any help would be appreciated thank you so much

Replace the bulb. It is linked to the interior light fuse.

Hello. Here is the removal procedure for removing the rear motor.

With the MobilOne information in hand, return to the suppliers and ask them look in the footnotes or appendix of their parts book to find an alternate or special application listing.

possible a faulty vehicle speed sensor(VSS) as it reports to all those functions run the fault codes for a check

May be low on fluid in reservoir.

23ftbs +90' + 90'

no to knock you for what your doing ,but most fast oil change places do it for about 25.00 ! some models you need to remove the plastic valance ,did you look it up at autozone library

sounds like a sticky Idle Speed control (ISC) valve or muck in the throttle body, try cleaning them first, if that does not work a new ISC Valve will be the way to go.........

I have two 2006 Kia Sportages and they both do the same. I'm not sure but I think the cooling fan is programmed to start if using a remote starter.