Radio and LED display

For Renault radio codes use the service on this link: Car radio codes in Uxbridge London Gumtree

you must take the car to the agents there they will remove the radio to get the T number. That with the vin number they will be able to issue your radio code on there secure network

There should be a 14 character Serial Number beginning with RG or RN or PH or similar (often found stamped in the metal casing )  and maybe a Security Number in the format of TOA123 or TA123 or just A123 at the end of a barcode so please quote EVERYTHING you can find

The code should be written in one of the renault books or on a seperate card in the renault service/warranty etc books case. If not, then you will have to call the selling dealer to ask if he has on record the code. Hope that helps

refer to radio user hand book or check for radio key card or contact a deelrship

Hi All, the very same thing happened to me. Cold weather broke my radio and the display screen stayed on with the time and temperature but the radio wouldn't work. I rang Renault & they said I need to come in an get a new radio but I put it off. In the end the problem started affecting my battery and the car wouldn't start. But then when I jump started it, it also started the radio again perfectly. Problem solved!
Hope this helps. Good luck!

Have you checked the fuse?

cd player uses the display above the radio on the later model,either take it to reanult garage or put a belson in like mine whic plays USB/SD card/ CD/radio ,it was about 90€ and trust me it brilliant no more cds in car ,just one sd chip 2 gb all my favourite tunez on one device

You do not use the buttons.

You have to use the Steering Wheel remote Control
===========================================
Philips Renault Code Entry 
 
Turn on the radio and the display will show 'CODE'
 
Use the steering controls for code entry.
 
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [¬ ] button then rotate the thumb wheel for the correct fourth digit
 
If the correct code is now shown on screen, 
press and hold the [ ¬] button for up to 10 seconds to store the code 

to enter your code when the cd player displays error leave cd player switched on and after 20 mins or so i will display 0000 then you will be able to enter your code this happens when some 1 has entered the wrong code