SOURCE: I cant get to the
Remove the two ten millimeter bolts that hold the plastic guard on out and remove the guard.
SOURCE: What kind of transmission do I need for my 1985
IF HAD A 231 V6 IT HAD A THM200 - 4R. IF YOU HAD A 307V8 OR 350V8 305V8 THM350C TRANSMISSION.
SOURCE: 98 buick lesabre starter
The starter is on the front of the engine, towards the transmission.
There are only two bolts and two nuts that hold it in.
The nuts hold two wires to the starter, one is connected to the positive battery terminal, the other is to engage the starter solenoid.
First disconnect the positive main wire at the battery.
Then, remove the large and small nuts holding both wires onto the starter. Be careful, since the large nut is copper and easy to strip.
There is a black plastic cover that goes behind the starter between the engine and transmission and may interfere with removal. There are three screws that hold it on. There are two that are easily seen on the larger portion, and one hidden very near to the front of the starter. It might be hard to see without a flashlight.
After removing the plastic cover, you should be able to loosen and remove the two large bolts holding the starter in.
Hope this helps, if you have any questions post again!
249 views
Usually answered in minutes!
×