DTC P0770 - SOLENOID CIRCUIT
In order to so9lve it, you will need to replace the solenoid pack.
Check this information HERE.
Hope this helps; also keep in mind that your feedback
is important and
I`ll appreciate your time and consideration if you leave some
testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
You are missing one number from your code. If its p0770 its a solenoid.
SOURCE: 2001 toyota tundra stalls when put in gear
If the engine stalls abruptly on your Cirrus, as if some one clamped
it, then I would suspect that the 'lock-up' function on the torque
converter of the transmission is in the lock-up position. That means it
is the same as popping the clutch on a conventional transmission car,
which cause the same stall. If you can't drive the car, I would call
around to several independent transmission shops to find one that is
familiar with the Chrysler 41TE transmission and that appears to be
honest. Ask if they have a diagnostic readout box to communicate with
the transmission control computer. If they do then have the car towed
there and let them try a readout. If they get a code 38 or 0740
(depending upon what year model you have there) then that would show
that the lock-up is the problem. If you are lucky the problem will be
with a solenoid switch or valve in the box on the side of the
transmission which can be corrected easily without removing the
transmission. Because this possibility (along with about 6 other
causes) is worth pursuing, I would want a shop that is not going to
talk you into a "rebuild" without first looking into all the possible
reasons for the lock-up condition so you aren't "taken for a ride".
So ask friends if they know a good honest shop and check them out as to
how well they understand the Chrysler transmission. You may end up at a
Chrysler dealer, but insist on their trying all the other possible
causes before authorizing removal of the transmission which is a very
expensive repair and may not be necessary.
SOURCE: 2001 toyota tundra towing issues
There are a number of aftermarket kits specifically made for your vehicle.
I did a quick search on yours, and here's what I found
http://www.etrailer.com/pc-VWH~118378.htm
Not a bad deal for $55, and it's all plug and play.
SOURCE: the security system is going off in my toyota tundra 2001 truck
lock the doors then shut it and unlock it with the key on drivers side it should go off and start
1,045 views
Usually answered in minutes!
P770 is not a vaild code, not enough numbers.
sorry still booting up my re-install of windows and havent got the adobe reader installed yet which means i cannot read the PDF documents as yet .Its still doing the security updates ,if no one replys later then post a reply and tomorrow i will answer for you
P0770 Shift Solenoid E
×